Hi,
1.3.6.1.2.1.17.7.1.4.3 is read-only. Have a look at
1.3.6.1.4.1.1991.1.1.3.2.7.1.21 instead.
snmpwalk -v2c -c $COMMUNITY $IP 1.3.6.1.4.1.1991.1.1.3.2.7.1.21
iso.3.6.1.4.1.1991.1.1.3.2.7.1.21.123 = STRING: "TEST2"
iso.3.6.1.4.1.1991.1.1.3.2.7.1.21.124 = STRING: "VLAN124"
iso.3.6.1.4.1.1991.1.1.3.2.7.1.21.125 = STRING: "VLAN125"
iso.3.6.1.4.1.1991.1.1.3.2.7.1.21.126 = STRING: "VLAN126"
snmpset -v2c -c $COMMUNITY $IP iso.3.6.1.4.1.1991.1.1.3.2.7.1.21.123 s
HELLOMYFRIEND
iso.3.6.1.4.1.1991.1.1.3.2.7.1.21.123 = STRING: "HELLOMYFRIEND"
iso.3.6.1.4.1.1991.1.1.3.2.7.1.21.124 = STRING: "VLAN124"
iso.3.6.1.4.1.1991.1.1.3.2.7.1.21.125 = STRING: "VLAN125"
iso.3.6.1.4.1.1991.1.1.3.2.7.1.21.126 = STRING: "VLAN126"
You can also take a look at some other tools than can configure advanced
things via ssh or telnet or can inject whole configurations.
Some people use
Netmikto
https://github.com/ktbyers/netmiko
and there is also kind of official brocade client called clicrud
https://github.com/DavidJohnGee/clicrud
I did my own injection client a while ago to escape the python world.
https://github.com/ipcjk/brocadecli
Regards
Jörg
On 22 Jun 2017, at 10:58, Tom Storey wrote:
Hi everyone,
Im writing some scripts that create VLANs and assigns ports to them
via
SNMP, and so far everything is working pretty good, except that when I
create the VLAN, it doesnt seem to save the name that I supply along
with
it. For example, when I execute the following command:
snmpset -v2c -c.... x.x.x.x .1.3.6.1.2.1.17.7.1.4.3.1.1.123 s TEST
.1.3.6.1.2.1.17.7.1.4.3.1.2.123 x 0x00 .1.3.6.1.2.1.17.7.1.4.3.1.4.123
x
0x00 .1.3.6.1.2.1.17.7.1.4.3.1.5.123 i 4
VLAN 123 is created, but the name TEST is not applied:
#sh vlan brief
Configured PORT-VLAN entries: 5
Maximum PORT-VLAN entries: 4095
Default PORT-VLAN id: 1
VLAN Name Encap ESI Ve Pri
Ports
---- ---- ----- --- ----- ---
-----
1 DEFAULT-VL - -
Untagged
Ports : e 1/1 to 1/24 e 2/1 to 2/4
123 [None] - -
Statically
tagged Ports : e 1/10 to 1/11
FWIW the above command works fine on other switches that I am testing
against, they all save the name as expected.
Attempting to set the name afterwards via a separate snmpset doesnt
yeild
any better results.
Does anyone know what Im doing wrong here? Should I be poking a
different
OID perhaps?
Running:
System: NetIron CER (Serial #: ...., Part #: ....)
Boot : Version 5.6.0cT185 Copyright (c) 1996-2013 Brocade
Communications Systems, Inc.
Monitor : Version 5.6.0cT185 Copyright (c) 1996-2013 Brocade
Communications Systems, Inc.
IronWare : Version 5.6.0dT183 Copyright (c) 1996-2013 Brocade
Communications Systems, Inc.
Software might be a bit old, could probably try a new version if
people
think that might help.
Cheers
Tom
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
