Hello,
is there any "hidden" command e.g. on 07.3.00h for printing out optical
values, when a link is not fully connected?
For example, using the same vendor optic between sites A and B, B shows
no TX,RX at all.
A:
# show optic 11
Port Temperature Tx Power Rx Power Tx Bias Current
+----+-----------+----------+------------+-------------------+
11 52.3906 C 000.8022 dBm -011.5676 dBm 30.178 mA
Normal Normal Normal Normal
# show interfaces ethernet 11 | include up
10GigabitEthernet11 is up, line protocol is up
Configured speed 10Gbit, actual 10Gbit, configured duplex fdx, actual
fdx
But site B:
# show interfaces ethernet 11 | include line
10GigabitEthernet11 is down, line protocol is down
#show optic 11
# (empty line)
Regards
Jörg
_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp
