What happens if you plug the usb disc into a normal linux box ?
mailinglistrecipient schrieb: > I tried finally to use the phrozen patch and installed a new images. > other errors but with the same theme :) > > //John > > Jan 1 00:02:21 axis-00408c012078 kernel: 8:0:0:0: scsi: Device > offlined - not ready after error recovery > Jan 1 00:02:21 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:02:21 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:02:21 axis-00408c012078 kernel: usb 1-2: new full speed USB > device using hc-crisv10 and address 11 > Jan 1 00:02:21 axis-00408c012078 kernel: scsi9 : SCSI emulation for > USB Mass Storage devices > Jan 1 00:02:33 axis-00408c012078 kernel: usb 1-2: reset full speed > USB device using hc-crisv10 and address 11 > Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[184] > Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[185] > Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[186] > Jan 1 00:02:33 axis-00408c012078 kernel: usb 1-2: device descriptor > read/64, error -71 > Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[187] > Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[188] > Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[189] > Jan 1 00:02:33 axis-00408c012078 kernel: usb 1-2: device descriptor > read/64, error -71 > Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:02:33 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:02:34 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:02:34 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:02:35 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:02:35 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:02:36 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:02:36 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:02:36 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:02:36 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:02:36 axis-00408c012078 kernel: usb 1-2: USB disconnect, > address 11 > Jan 1 00:02:36 axis-00408c012078 kernel: 9:0:0:0: scsi: Device > offlined - not ready after error recovery > Jan 1 00:02:37 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:02:37 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:02:37 axis-00408c012078 kernel: usb 1-2: new full speed USB > device using hc-crisv10 and address 12 > Jan 1 00:02:37 axis-00408c012078 kernel: scsi10 : SCSI emulation for > USB Mass Storage devices > Jan 1 00:02:48 axis-00408c012078 kernel: usb 1-2: reset full speed > USB device using hc-crisv10 and address 12 > Jan 1 00:02:48 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[203] > Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[204] > Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[205] > Jan 1 00:02:49 axis-00408c012078 kernel: usb 1-2: device descriptor > read/64, error -71 > Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[206] > Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[207] > Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[208] > Jan 1 00:02:49 axis-00408c012078 kernel: usb 1-2: device descriptor > read/64, error -71 > Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:02:49 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:02:50 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:02:50 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:02:51 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:02:51 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:02:52 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:02:52 axis-00408c012078 kernel: usb 1-2: USB disconnect, > address 12 > Jan 1 00:02:52 axis-00408c012078 kernel: 10:0:0:0: scsi: Device > offlined - not ready after error recovery > Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:02:52 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:02:52 axis-00408c012078 kernel: usb 1-2: new full speed USB > device using hc-crisv10 and address 13 > Jan 1 00:02:52 axis-00408c012078 kernel: scsi11 : SCSI emulation for > USB Mass Storage devices > Jan 1 00:03:04 axis-00408c012078 kernel: usb 1-2: reset full speed > USB device using hc-crisv10 and address 13 > Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[222] > Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[223] > Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[224] > Jan 1 00:03:04 axis-00408c012078 kernel: usb 1-2: device descriptor > read/64, error -71 > Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[225] > Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[226] > Jan 1 00:03:04 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[227] > Jan 1 00:03:05 axis-00408c012078 kernel: usb 1-2: device descriptor > read/64, error -71 > Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:03:05 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:03:06 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:03:06 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:03:07 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:03:07 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:03:08 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:08 axis-00408c012078 kernel: usb 1-2: USB disconnect, > address 13 > Jan 1 00:03:08 axis-00408c012078 kernel: 11:0:0:0: scsi: Device > offlined - not ready after error recovery > Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:03:08 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:03:08 axis-00408c012078 kernel: usb 1-2: new full speed USB > device using hc-crisv10 and address 14 > Jan 1 00:03:08 axis-00408c012078 kernel: scsi12 : SCSI emulation for > USB Mass Storage devices > Jan 1 00:03:20 axis-00408c012078 kernel: usb 1-2: reset full speed > USB device using hc-crisv10 and address 14 > Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[241] > Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[242] > Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[243] > Jan 1 00:03:20 axis-00408c012078 kernel: usb 1-2: device descriptor > read/64, error -71 > Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[244] > Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[245] > Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b8a0[246] > Jan 1 00:03:20 axis-00408c012078 kernel: usb 1-2: device descriptor > read/64, error -71 > Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:03:20 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:03:21 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:03:21 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:03:22 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:03:22 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:03:23 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:23 axis-00408c012078 kernel: usb 1-2: USB disconnect, > address 14 > Jan 1 00:03:23 axis-00408c012078 kernel: 12:0:0:0: scsi: Device > offlined - not ready after error recovery > Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:03:23 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:03:23 axis-00408c012078 kernel: usb 1-2: new full speed USB > device using hc-crisv10 and address 15 > Jan 1 00:03:24 axis-00408c012078 kernel: scsi13 : SCSI emulation for > USB Mass Storage devices > Jan 1 00:03:35 axis-00408c012078 kernel: usb 1-2: reset full speed > USB device using hc-crisv10 and address 15 > Jan 1 00:03:35 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[260] > Jan 1 00:03:35 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[261] > Jan 1 00:03:35 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[262] > Jan 1 00:03:35 axis-00408c012078 kernel: usb 1-2: device descriptor > read/64, error -71 > Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[263] > Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[264] > Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq warn: 3rd error > for epid:0 (in ctrl) URB:0xc045b840[265] > Jan 1 00:03:36 axis-00408c012078 kernel: usb 1-2: device descriptor > read/64, error -71 > Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:03:36 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:03:37 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:03:37 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > Jan 1 00:03:38 axis-00408c012078 kernel: hub 1-0:1.0: Cannot enable > port 2. Maybe the USB cable is bad? > Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode > Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_rh: Physical port 2 > disabled > Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started > Jan 1 00:03:38 axis-00408c012078 kernel: crisv10_irq dbg: > ctr_status_irq, controller status: host_mode started running > > --- In [email protected] <mailto:foxboard%40yahoogroups.com>, > "mailinglistrecipient" > <[EMAIL PROTECTED]> wrote: > > > > Hi again, > > > > I have now tried with kernel 2.6, I dump the /var/log/messages below. > > It didn't get better anyway. > > The USB HDD is powerd via the USB bus itself. Let's say the > > powersupply isn't capable of delivering the power needed, could > > behaviours like this occure? Or wouldn't the HDD even power up if the > > power isn't sufficient? > > > > > > //John > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/foxboard/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/foxboard/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
