I need too!
BASIC4EVER
j_m4ck <[EMAIL PROTECTED]> escreveu:
j_m4ck <[EMAIL PROTECTED]> escreveu:
Hi,
this question is aimed at the ACME guys; I hope this is the right
place to ask the questions...
I have been using the original MCM Fox board for several months
developing software to be ported to a custom Etrax board based on the
100LX. We recently got the first new boards but can't get to boot. We
have been comparing SDRAM and Ethernet signals with those on a new Fox
board and found this very useful in diagnosing problems. Is it
possible to have the new Fox schematic put on the website?
We found a problem on our board where data bus lines D0 and D2 were
linked; making the same modification to the Fox board recreated the
symptoms. Also does anyone know if the Etrax requires DRAM to be
properly connected to boot in serial/ethernet mode?
Thanks in advance for our help,
Regards,
John Mackenzie
O Yahoo! está de cara nova. Venha conferir! __._,_.___
SPONSORED LINKS
| Embedded linux | Embedded linux system | Communication and networking |
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___
