Hi John, I had to re-install SDK in order to get a working kernel again. I tried to follow what Patrick Bury did for kernel 2.4 (message #1959), kernel config only.
Here we go: 1) Device is a Leadership mini keypad 2) It works fine for Fedora 4 3) Here is what it says: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=05a4 ProdID=9840 Rev= 1.10 S: Product=USB Compliant Keypad C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 48mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=13ms 4) Here is what foxboard says (without setting HID) drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. usb 1-1: new low speed USB device using ETRAX 100LX and address 103 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. usb 1-1: new low speed USB device using ETRAX 100LX and address 107 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. usb 1-1: new low speed USB device using ETRAX 100LX and address 111 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. [EMAIL PROTECTED] /root]drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. usb 1-1: new low speed USB device using ETRAX 100LX and address 103 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. usb 1-1: new low speed USB device using ETRAX 100LX and address 107 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running. usb 1-1: new low speed USB device using ETRAX 100LX and address 111 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. drivers/usb/host/hc_crisv10.c: Got epid attn for control endpoint, epid 0 drivers/usb/host/hc_crisv10.c: 3rd error for epid 0 drivers/usb/host/hc_crisv10.c: Completing ctrl urb with status -71. usb 1-1: device descriptor read/64, error -71 drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller in host mode. drivers/usb/host/hc_crisv10.c: USB controller started. drivers/usb/host/hc_crisv10.c: USB controller running.106 5) The light keeps blinking while fox tries to detecd the device As you are an expert, i will follow your instruction Thank you John if you could help me with some directions. Alexander --- In [email protected], [EMAIL PROTECTED] wrote: > > can you print theboot log up to the point where it dies and what device > is it exactly that you are trying to attach ? have you plugged it into > a normal linux box and run "cat /proc/bus/usb/devices" to see what cdc > it is ? > > On 15.12.2006 at , you wrote: > > Hi all, > > > > Has someone configured the kernel 2.6 to recognize a USB Kwypad? > > I have tried to set HID Interface, but the image hangs during the > boot. > > Any suggestion would be really apreciated. > > > > rgds > > > > Alexander > > > > > > >
