--- In [email protected], Roberto Asquini <[EMAIL PROTECTED]> wrote:
>
> Hello,
>
> the standard fomage coming with the classic Fox (the red ones) has
> enabled the ttyS3.
> If you have a classic (RED) Fox you can use the following image from
our
> repository that is working with the SX18:
> http://www.acmesystems.it/articles/00701/fimage_701_v101.zip
>
> If you still are blocked please report which Fox you have: classic red
> or green LX and report the output of the command:
> uname -a
>
> Also please attach the complete output of the boot of the board
> launching the command:
> dmesg
>
>
> Best regards,
>
> Roberto Asquini
>
> adeplante ha scritto:
> >
> > Hello,
> >
> > i use foxboard on SX18 board and i want use serial DB9 on SX18.
> > The problem is that with ttyS3 i received a "no much device" error.
> > It's ok for ttyS2 but not ttyS3. I try fimage from areasx web it's
> > same error. How add ttyS3 in fimage ?
> >
> > thank's by advance
> >
> >
>
>
> --
> Roberto Asquini
> Acme Systems srl
> [EMAIL PROTECTED]
> http://www.acmesystems.it
>
It s ok, thank you very well
