Dear Eric, the processor ETRAX 100LX used in the FoxBoard doesn't have a native sleep mode.
We added in the project of the FoxBoard LX a jumper (J13). Shortening this jumper will switch off the 3.3V DC regulator onboard. A small external processor or logic can be designed so to switch the FoxBoard off and then on depending from the policy chosen. A wakeup by LAN seems to me not easy. Timed wakeup or external input wakeup (acting on a simple external processor, with notification of the fox to the central station when awake could be the option for a solar powered system. Best regards, Roberto Asquini ericgarnier87 ha scritto: > > Hi all, > > I have just acquired of a FOX board to off-set via the Web, the > ordering of a system usually ordered by RS232. After some tests of > writing and reading on the serial port by adapting the programs out of > C of demonstration provided, all is OK. > > But, the system that I must order by FOX board is powered by solar > panel. Therefore, the unit (system + FOX board ) must very little > consume. I would like to know if there was a method "to sleep" FOX card > and "wake up" via the Web. Thank you in advance for your answer. > > Excuse me for my English. > > Eric. > > -- Roberto Asquini Acme Systems srl [EMAIL PROTECTED] http://www.acmesystems.it
