Did you choose the option 'bridge' for the network connection of your virtual machine?
- Harm --- In [email protected], "thedos1701" <[EMAIL PROTECTED]> wrote: > > I couldn't flash my fox board with the web way and also with the ftp > way, the only way to flash the foxboard for the first time was with > the sdk, but i have a linux machine to do this, i don't know what > could be the problem with a virtual machine. > > --- In [email protected], "qubit_infinity" <qubit_infinity@> > wrote: > > > > Hi, > > > > I cant seem to flash my fox board. > > > > I have tried the network method - nothing happens (I am using a > > virtual machine, but the fox board and vm can see eachother) > > > > My board is a 416 and I have downloaded and tried both the 2.4 and 2.6 > > kernel versions for this board from the acme site. > > > > I then tried the web method > > > > after clicking upgrade, I get the following message: > > > > Preparing system for upgrade ... > > Entering run level 4 ... > > Waiting for processes to be stopped in runlevel 4 ... > > ... waiting ... > > In run level 4. > > Stopping remaining processes. > > sending TERM signal ... > > All processes stopped. > > The file system will be factory default before reboot. > > Unmounting file system /var ... > > Unmounting file system /mnt/flash ... > > File systems successfully shut down. > > Receiving new firmware ... > > Error: format error in data received. > > The system upgrade failed. > > The unit will now reboot. > > To continue, please connect to the unit again. > > There may be a short delay before the new connection is accepted. > > This connection will now close. > > > > The fox board is still in a working condition - serving web pages etc > > > > can anyone help > > THanks > > >
