Hello,
thank's for your help. The result is : >>>>[EMAIL PROTECTED] /root]717# spcaload Using /lib/modules/2.6.15/kernel/drivers/media/video/videodev.ko Using /lib/modules/2.6.15/kernel/drivers/usb/media/spca5xx/spca5xx.ko >>>>>Part of dmesg : (full after) Linux video capture interface: v1.00 usbcore: registered new driver spca5xx drivers/usb/media/spca5xx/spca_core.c: spca5xx driver 00.57.06LE registered usb 1-1: new full speed USB device using hc-crisv10 and address 3 >>>>>[EMAIL PROTECTED] /root]717# servfox -d /dev/video0 -s 640x480 -w 7070 servfox version: 1.1.3 date: 11:12:2005 (C) [EMAIL PROTECTED] ERROR opening V4L interface >>>>>>>Full output dmesg : [EMAIL PROTECTED] /root]717# dmesg Linux version 2.6.15 ([EMAIL PROTECTED]) (gcc version 3.2.1 Axis release R63/1.63) #13 PREEMPT Fri Apr 27 14:18:08 CEST 2007 Setting up paging and the MMU. On node 0 totalpages: 2048 DMA zone: 2048 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 Linux/CRIS port on ETRAX 100LX (c) 2001 Axis Communications AB Built 1 zonelists Kernel command line: root=/dev/mtdblock3 init=/linuxrc PID hash table entries: 128 (order: 7, 2048 bytes) ds1302: RTC not found. Enabling watchdog... Dentry cache hash table entries: 4096 (order: 1, 16384 bytes) Inode-cache hash table entries: 2048 (order: 0, 8192 bytes) Memory: 13904k/16384k available (1321k kernel code, 2480k reserved, 313k data, 64k init) Calibrating delay loop... 99.53 BogoMIPS (lpj=497664) Mount-cache hash table entries: 1024 NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub JFFS version 1.0, (C) 1999, 2000 Axis Communications AB JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. io scheduler noop registered io scheduler cfq registered ETRAX 100LX serial-driver 1.25 $, (c) 2000-2004 Axis Communications AB ttyS0 at 0xb0000060 is a builtin UART with DMA ttyS2 at 0xb0000070 is a builtin UART with DMA ttyS3 at 0xb0000078 is a builtin UART with DMA fast_timer_init() RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize PPP generic driver version 2.4.2 PPP Deflate Compression module registered ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2003 Axis Communications AB eth0: changed MAC to 00:40:8C:CD:00:00 ETRAX 100LX USB Host Controller version 1.00 (c) 2005, 2006 Axis Communications AB usb_devdrv: Etrax 100LX USB Revision 16 v1,2 usb_devdrv: Bulk timer interval, start:3 eot:6 usb_devdrv: Claimed interface for USB physical port 1 usb_devdrv: Claimed interface for USB physical port 2 crisv10_irq dbg: ctr_status_irq, controller status: host_mode hc-crisv10 hc-crisv10.0: ETRAX 100LX USB Host Controller hc-crisv10 hc-crisv10.0: reset hc-crisv10 hc-crisv10.0: new USB bus registered, assigned bus number 1 hc-crisv10 hc-crisv10.0: start hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. crisv10_irq dbg: ctr_status_irq, controller status: host_mode started crisv10_irq dbg: ctr_status_irq, controller status: host_mode started running usb 1-2: new full speed USB device using hc-crisv10 and address 2 usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device usbcore: registered new driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 usbcore: registered new driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver cse0: Probing a 0x04000000 bytes large window at 0xe0000000. cse0: Probing for AMD compatible flash... cse0: unknown flash device at 0x0, mfr id 0xc2, dev id 0x22a7 cse0: Found no AMD compatible device at location zero cse0: Found 1 x16 devices at 0x0 in 16-bit bank cse0: Found an alias at 0x400000 for the chip at 0x0 cse0: Found an alias at 0x800000 for the chip at 0x0 cse0: Found an alias at 0xc00000 for the chip at 0x0 cse0: Found an alias at 0x1000000 for the chip at 0x0 cse0: Found an alias at 0x1400000 for the chip at 0x0 cse0: Found an alias at 0x1800000 for the chip at 0x0 cse0: Found an alias at 0x1c00000 for the chip at 0x0 cse0: Found an alias at 0x2000000 for the chip at 0x0 cse0: Found an alias at 0x2400000 for the chip at 0x0 cse0: Found an alias at 0x2800000 for the chip at 0x0 cse0: Found an alias at 0x2c00000 for the chip at 0x0 cse0: Found an alias at 0x3000000 for the chip at 0x0 cse0: Found an alias at 0x3400000 for the chip at 0x0 cse0: Found an alias at 0x3800000 for the chip at 0x0 cse0: Found an alias at 0x3c00000 for the chip at 0x0 Amd/Fujitsu Extended Query Table at 0x0040 cse0: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cse1: Probing a 0x04000000 bytes large window at 0xe4000000. cse1: Probing for AMD compatible flash... cse1: unknown flash device at 0x0, mfr id 0xb930, dev id 0x2c4 cse1: Found no AMD compatible device at location zero CFI: Found no cse1 device at location zero cse0: 0x00400000 bytes of flash memory. Found a valid partition table at 0xf001000a-0xf0010056. /dev/flash1 at 0x00010000, size 0x00350000 /dev/flash2 at 0x00360000, size 0x000a0000 Adding readonly flash partition for romfs image: /dev/flash3 at 0x000e3408, size 0x0025e000 Creating 4 MTD partitions on "cse0": 0x00000000-0x00010000 : "part0" 0x00010000-0x00360000 : "part1" 0x00360000-0x00400000 : "part2" 0x000e3408-0x00341408 : "romfs" I2C driver v2.2, (c) 1999-2004 Axis Communications AB ==> Improvements done by Geert Vancompernolle - December 2006 I2C Major: 254 / I2C Name: i2cgvc gpio init GPIO port G: in_bits: 0x01FFFF3F out_bits: 0x3200003E val: FDFFFF7C GPIO port G: dir: 00000000 changeable: 01FFFF01 ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002, 2003, 2004 Axis Communications AB err: timer0 irq for gpio err: PA irq for gpio ds1302: RTC not found. NET: Registered protocol family 2 IP route cache hash table entries: 256 (order: -3, 1024 bytes) TCP established hash table entries: 1024 (order: -1, 4096 bytes) TCP bind hash table entries: 1024 (order: -1, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered ip_conntrack version 2.4 (128 buckets, 1024 max) - 166 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 64k freed eth0: changed MAC to 00:40:8C:00:00:60 Linux video capture interface: v1.00 usbcore: registered new driver spca5xx drivers/usb/media/spca5xx/spca_core.c: spca5xx driver 00.57.06LE registered usb 1-1: new full speed USB device using hc-crisv10 and address 3 > > after all drivers are loaded, plug in the webcam and look if the > device is found and the driver attaches itself to the device > > basically ... > > 1.) load drivers > 2.) plug in webcam > 3.) dmesg > 4.) paste the output here > > John > > Quoting adeplante <[EMAIL PROTECTED]>: > > > I don't understand, can you tell me more please ? > >> > >> does the driver register itself for the cam ? > >> > >> > >> > >> Quoting adeplante <azdep@>: > >> > >> > Hello, > >> > > >> > i sum up my problem : > >> > > >> > uname : > >> > Linux axis 2.6.15 #13 PREEMPT Fri Apr 27 14:18:08 CEST 2007 cris > > unknown > >> > > >> > spcaload : (a second time) > >> > Using /lib/modules/2.6.15/kernel/drivers/media/video/videodev.ko > >> > insmod: cannot insert > >> > `/lib/modules/2.6.15/kernel/drivers/media/video/videodev.ko': File > >> > exists (-1): File exists > >> > Using /lib/modules/2.6.15/kernel/drivers/usb/media/spca5xx/spca5xx.ko > >> > insmod: cannot insert > >> > `/lib/modules/2.6.15/kernel/drivers/usb/media/spca5xx/spca5xx.ko': > > File > >> > exists (-1): File exists > >> > > >> > servfox : > >> > servfox version: 1.1.3 date: 11:12:2005 (C) mxhaard@ > >> > ERROR opening V4L interface > >> > > >> > > >> > dmesg : > >> > Linux video capture interface: v1.00 > >> > usbcore: registered new driver spca5xx > >> > drivers/usb/media/spca5xx/spca_core.c: spca5xx driver 00.57.06LE > >> > registered > >> > > >> > > >> > I use sdk 205. > >> > > >> > My cam is Logitech Communicate STX : product ID -> 0x08d7. > >> > This cam is ok on my pc with Fedora Core 6, kernel 2.6.20. > >> > > >> > > >> > Anybody have an idea to help me ? > >> > > >> > Thank's by advance. > >> > > >> > > >> > > >> > > >> > [Non-text portions of this message have been removed] > >> > > >> > > >> > > > > > > >
