--- In [email protected], Peter O <[EMAIL PROTECTED]> wrote: > > Wolf wrote: > > > > In message <[EMAIL PROTECTED]>, psykojyce writes > > > > > > Hello all. > > > > > > I would like to know if it was possible to use one 7.2v RC battery > > > (3000mAh) to power supply the board (with the fox power supply : > > > http://www.acmesystems.it/?id=16) ? > > > > >From reading the spec the answer is no. > > > > Power-supplies need a certain input voltage greater than the output > > voltage if the regulation is to be guaranteed. > > > > There are specialist "Low-differential" voltage regulators available > > that will maintain regulation when the input voltage is only a Volt > > above the output voltage. > > Why not use 2 7.2V batteries in series ? > That gives 14.4V which is more than enough for the FPS to function. > > Peter >
I can't do that because I can't buy the FPS (no RoHS in france). :/
