--- In [email protected], "dwrenne" <[EMAIL PROTECTED]> wrote: > > Hi, > > I have an 8-16 board and am trying to use it with [EMAIL PROTECTED] extra > board > with GSM , etc . I have tried to flash the board using the web > interface but that fails. I then use the linux flash method. I crossed > J8 with a jumper and then run the command in Linux. It ran fine and > the code upload finished properly. However, the red cursor has started > to flash and nothing I do now will stop it. As well as that I cannot > initialize the modem using the set bits command, or by crossing the > contacts > > I use the 816 image on the FOX GM page. > > Earlier I could get the telit module to initialise (as in the lights > used to flash on it), but now I can't. The board seems to run ok and > ssh works fine as well as USB. I also downloaded an ran the small c > program to set the ports "How to set PB6 and PB7 line with FOXGM" > > Any ideas > > Diarmuid >
Have you set the MAC Address? If you didn't then the FoxBoard red led will flash. You can find more details in the fox documentation. Hope it will work for you. :)
