Hi all, I've bought a FOXCOM to use it with can bus but now I don't know what to do. I've made a new image enabling the can driver. I flashed the board.
My questions are: - what kind of driver does the sdk include? I've found this one on the internet, http://home.wanadoo.nl/arnaud/ is this the right one? - Do I have to load the driver or something else? in /dev I have the can0 can1 can2 files but during boot I don't see messages telling the can driver is loaded. - Where can I find docs on how to use the driver? I've downloaded some examples from the above site but it says it can't open the can0 device! Thank you for your help! Paolo Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/foxboard/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/foxboard/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
