Yes we are still working on this board. The first release will be very different from the actual FOX Board. Same size but different J6 and J7 connectors. We'll use SMD 1.27mm connector due to the large amount of I/O pins.
The components on the board will be: Atmel AT91SAM9260 Actel FPGA ProASIC3 (A3P250 and higher) 8MB of data flash 32MB if RAM 2 Host USB 2.0 1 Ethernet 1 Client USB 2.0 1 Transflash socket After that, a simpler version with no FPGA and step 2.54mm connectors will exit. We are thinking also to another more simple version like a dual in-line module. Anyway the actual FOX Board LX832 will live for long time For who want to have more info or simply want to meet us, me and Roberto will be at Nurberg Embedded World from 26 to 27 of February at the Tigal.com (www.tigal.com) or EL.Micro (http://elmicro.com/) stand. BR Sergio Tanzilli Acme Systems srl Dave Van den Eynde wrote: > > > According to them, there's an ARM 9260 based board in the making, slated > for an april release and more info on the way. > > I haven't seen any specifications, though. What I mention here was > mentioned on this mailinglist last november and again earlier this month. > > Dave > > > */"brian.murphy13" <[EMAIL PROTECTED]>/* wrote: > > Hi,I have just got a Fox board and I was wondering where it is in the > development stage? I guess it has been out for a while and I wonted to > know if there was a new model in the development stages? > > >
