Hi, you have to edit:
/home/fox/devboard-R2_01/target/cris-axis-linux-gnu/mnt/flash/etc/conf.d/net.eth0 best regards Michael --- In [email protected], "Geert Vancompernolle" <[EMAIL PROTECTED]> wrote: > > --- In [email protected], "fatima_chillzz" <fatima_chillz@> > wrote: > > > > I want to change the default IPaddress of the fox kit while making the > > fimage on my PC. By using > > make menuconfig > > im not getting any option to set the ethenet settings. and the menu im > > getting by this command is a bit different then the one shown on site. > > Im using fedora 8. > > > > kindly tell me any way to change the ipwhile making fimage (although i > > know hoe to change the IPon kit, but i want these setting done on the > > fimage so that wenever i reflash my FOX, the ip is enabled that i want) > > > > Maybe this could help? > > http://www.acmesystems.it/?id=57 > > See first item: "How to change the IP address" > > Another way to do this (this is how I use it), is the following: > > - Modify the MAC address (2nd item on the above given page explains > how to do this) > - Activate the DHCP functionality in the FoxBoard image > - In your DHCP server (sometimes located in the router, but I don't > know how your set-up is), tell the server to return the IP address you > want, whenever the changed MAC address is put on the net. > > This way, you can change the IP address to whatever value you want > (but it should be in the range of the router network). > > Best rgds, > > --Geert >
