Joe,
Most likely you did a restore from tape on the AW/AP hosting the CP. This
can make the workfile used by the ICC and the CP inconsistent.
How to fix?
It depends. The official way is to SAVE ALL, Initialize, Reboot, LOAD ALL,
and rebuild.
There are some other things that can be done that are just too hard to
explain by e-mail.
Regards,
Alex Johnson
10707 Haddington
Houston, TX 77043
713.722.2859 (office)
713.722.2700 (switchboard)
713.932.0222 (fax)
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
-----Original Message-----
From: Joe Gale (MP) [SMTP:[EMAIL PROTECTED]]
Sent: Thursday, August 02, 2001 11:59 AM
To: Foxboro DCS Mail List (E-mail)
Subject: Missing Compound
We currently have a compound with 2 blocks in it that is running in
the CP
(CP40) and shows up in select but doesn't show up in the ICC. What
would be
the procedure to get the compound back in the ICC and get everything
to
agree again? What would have caused this problem? We are currently
running
at version 6.1.2 if that makes a difference.
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company.
All
postings from this list are the work of list subscribers and no
warranty
is made or implied as to the accuracy of any information
disseminated
through this medium. By subscribing to this list you agree to hold
the
list sponsor(s) blameless for any and all mishaps which might occur
due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
