We have 3 sets of fault tolerant integator30' and one single in the same
equipment cabinet.
Once or twice a year they just stop communicating, typically all of the
above at the same time. The screens Smurf and the operators go blind.
I can bring them back on line:
1: by going to the ICC
2: to the primary ecb for the integrator
3:Change the NRBUS from 2 to 1, accept it
4: Change the NRBUS back to original selection
Have any of the other Integrator uses ran into this problem? Also have you
ever found out what causes the event to occur, there by making it an event
that can be "fixed".
Mr. Robert Balmer
Climax Molybdenum
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]
