Freddy,
Rockwell has an emulator for the SLC500 series. See the product data sheet
at http://www.software.rockwell.com/rslogix-emu500/
I have used the Emulate 5 product which emulates a PLC/5. It has a neat
feature of using your PC's serial port as Channel 0 DF1 protocol. This
allows you to communicate to the emulated PLC with a serial connection as
if you had a -KF2 Quite handy if you ask me, especially if you are trying
to work out your gateway points.
BTW, our simulator talks to the emulated PLC.
Winston Jenks
Technical Director, Cape Software, Inc.
-----------------------------------------------------------------------
This list is neither sponsored nor endorsed by the Foxboro Company. All
postings from this list are the work of list subscribers and no warranty
is made or implied as to the accuracy of any information disseminated
through this medium. By subscribing to this list you agree to hold the
list sponsor(s) blameless for any and all mishaps which might occur due to
your application of information received from this mailing list.
To be removed from this list, send mail to
[EMAIL PROTECTED]
with "unsubscribe foxboro" in the Subject. Or, send any mail to
[EMAIL PROTECTED]