03.02.2012 16:01, Nikolai Zhubr:
03.02.2012 14:26, Florian Klaempfl:
How did you install debian? Or is it a chroot'ed debian?
No, it it not chrooted.
And by the way. If you somehow obtain wndr3800 and want debian on it, I
can probably prepare ready-to-use images for hard disk and internal
flash (It will then be debian-only until reflashed through recovery)
Nikolai
Basically I took kernel from openwrt 10.03.1 build tree (it is also
2.6.32 but modified slightly to better support platform-specific
peripherials), disabled NAND-related drivers, and enabled ehci,
usb_storage, ext4, etc as built-in. Then I took debian net-based
installer's initrd.gz for malta board
(http://ftp.debian.org/debian/dists/stable/main/installer-mips/current/images/malta/netboot/initrd.gz),
unpacked it into ext2-formatted 1st (small) partiton of USB hard disk,
keeping the rest of the disk available for adding more partitions later.
Then I plugged this disk into wndr3800 and booted my kernel via tftp
pointing it to /dev/sda1 as root. The only issue was that by default,
openwrt kernel does not include inotify support which debain wants
desperately, so I had to enable it and recompile. Other than that, all
the rest was pretty much regular net-based install over serial console.
One inconvenience for now is that manual intervention is needed upon
power-on to interrupt uboot before it proceeds normally to openwrt. I
think it might be possible to arrange kexec'ing from the running openwrt
but didn't try yet.
Nikolai
_______________________________________________
fpc-devel maillist - fpc-devel@lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-devel
_______________________________________________
fpc-devel maillist - fpc-devel@lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-devel
_______________________________________________
fpc-devel maillist - fpc-devel@lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-devel
