On 14-2-2012 23:43, stootch wrote: > W dniu 2012-02-14 10:41, > reinierolislagers-re5jqeeqqe8avxtiumw...@public.gmane.org pisze: >> You might try with a newer version; we have found and hopefully >> fixed some problems with lazarus make... > Um... >> Info: make FPC=/home/stootch/fpc/bin/fpc.sh >> --directory=/home/stootch/lazarus FPCDIR=/home/stootch/fpc/ >> UPXPROG=echo COPYTREE=echo clean all Info: Error setting Lazarus >> config: ERangeError/Range check error Lazarus retrieval/compilation >> failed.
DzieĆ dobry, Stootch! Ok. The binary you used was probably from the morning of the 14th. Since then, fixes have been made to the "which" command wrapper, which probably fixes the problem. Could you test again please? If it doesn't work, could you run it and send the output of 1. fpcup --help | grep "compiled with" #version of tool 2. fpcup --help | grep "for CPU" #platform used 3. cd ~/lazarus #(or your custom lazarus directory) #Check system wide settings (look for #FPC, FPC version, FPCDIR and UnitsDir: make fpc_baseinfo | less 4. cd ~/lazarus #(or your custom lazarus directory) #this should pick up the proper unit path #fpcdir and version from the fpcup-installed fpc version #Check (look for FPC, FPC version, FPCDIR and UnitsDir: make fpc_baseinfo FPC=~/<yourfpcdirectory>/bin/fpc.sh I'm assuming you're running fpcup with default values (i.e. lazarus directory = ~/lazarus, fpc directory = ~/fpc); if not, please adjust accordingly BTW, new Linux x64 binary reports SVN versions when updating. Ludo Brands is busy designing info+error log output... Thanks a lot for helping, Reinier _______________________________________________ fpc-pascal maillist - fpc-pascal@lists.freepascal.org http://lists.freepascal.org/mailman/listinfo/fpc-pascal