Hi,
I am french and the english lessons of the school are very old.
Sorry for my english.
I buyed a Dell laptop : studio 1735 with finger sensor Authentec
2810.
I intall Ubuntu 8.04.
[EMAIL PROTECTED]:/dev/bus/usb/002$ lsusb
Bus 007 Device 007: ID 0c45:63fa Microdia
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 006: ID 10eb:0001
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 008: ID 08ff:2810 AuthenTec, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
I tried to use the sensor but it does not work.
After searching the web, I download the latest version of fprint and
install it.
It does not recognize the sensor (i tried with fprint_demo).
I send a mail to Authentec support but they don't give the programming
informations.
I modify your AES2510 driver :
- FRAME_HEIGHT from 16 to 8
- MAX_FRAMES from 150 to 350
- product (at the end of the program) from 0x2580 to 0x2810
I install it again.
Fprint_demo tried to acces the sensor and now I get :
[EMAIL PROTECTED]:/$ fprint_demo
aes2501:error [read_data] bulk read error -110
fp:error [fp_dev_open] device initialisation failed, driver=aes2501
I don't know where to find the errors codes.
Do you know a general documentation on the way to acces usb devices and
the meaning of the error codes ?
Best regards
_______________________________________________
fprint mailing list
[email protected]
http://lists.reactivated.net/mailman/listinfo/fprint
