Here's the latest, after an afternoon of research (= banging my head against the wall):
- The project fails almost immediately, with this error: Mif2Go failed for file: C:\Project\Users_Roles.html type 1, code 2, at: Wed Aug 13 15:46:36 2014 Could not run DCL filter or other program. File not found. - All Mif2Go files are present and in the right places following an uninstall and fresh install from new ZIP. This means I do not know what file cannot be found. - I get the same failure even for projects that succeeded earlier in the day, with the same previously-successful ini files. - I have used (and resolved issues with) Mif2Go for 10 years, so I know how things should look - they look OK. - The save process generates good MIFs. I get the same error for each file, with the option to quit. If I do not quit, it makes a mif for the next file and then I get the error again. Mif2Go.ini increments normally for each file generated. - If I push through to the end, it generates all the MIFs but it does not clean them up and it generates no output, nor the _wrap folder. - The history and the log file look normal. - All the Mif2Go exe & dll files have full write permissions, including the two new ones in \fminit\Plugins. And remember that the whole system worked flawlessly for two big books before failing on the third, much smaller book just an hour later. I appreciate any ideas! On Thu, Aug 14, 2014 at 1:18 PM, Fei Min Lorente <feimin.lore...@onsemi.com> wrote: > Nope, sorry, I should have mentioned. I’m on FM10, Windows 7, using > Mif2Go V4U54. > > > > Fei Min > > > > *From:* John Sgammato [mailto:john.sgamm...@actifio.com] > *Sent:* Thursday, August 14, 2014 1:15 PM > *To:* Fei Min Lorente > *Cc:* framers@lists.frameusers.com > *Subject:* Re: Mif2Go suddenly failing on all machines > > > > Are you on FM12? > There were two new DLLs in FMINIT/Plugins for FM12. > > > > On Thu, Aug 14, 2014 at 1:12 PM, Fei Min Lorente < > feimin.lore...@onsemi.com> wrote: > > Hi John: > > I just did a Save Using Mif2Go on an old tried and true manual, and > everything worked just fine. > > Fei Min > > ------------------------------ > > Message: 13 > Date: Wed, 13 Aug 2014 18:18:24 -0400 > From: John Sgammato <john.sgamm...@actifio.com> > To: Lin Sims <ljsims...@gmail.com> > Cc: framers@lists.frameusers.com > Subject: Re: Mif2Go suddenly failing on all machines > Message-ID: > <CAKwJh11XjZFNVpgDEeA0MG=xi=0Q1oDxd0TZBsYvta= > ddw1...@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > I'd be very grateful if a few of my colleagues here could try a quick > mif2go save and see if you get the DCL not found error. > On Aug 13, 2014 6:15 PM, "Lin Sims" <ljsims...@gmail.com> wrote: > > > And if you do find a fix, let us know, just in case someone else runs > into > > the same issue. > > > > > > On Wed, Aug 13, 2014 at 4:00 PM, Scott Prentice <s...@leximation.com> > > wrote: > > > >> If you don't get anything here, you might try the new mif2go list .. > >> > >> https://groups.yahoo.com/neo/groups/mif2go/info > >> > >> ...scott > >> > >> On 8/13/14 12:53 PM, John Sgammato wrote: > >> > >> Yesterday I was generating a bunch of XHTML output with Mif2Go, when > >> suddenly I started to fail with this error: > >> Mif2Go failed for file: C:\Project\Users_Roles.html > >> type 1, code 2, at: Wed Aug 13 15:46:36 2014 > >> Could not run DCL filter or other program. > >> File not found. > >> > >> It had worked fine just an hour before. Nothing had changed. > >> Nonetheless I rechecked all my environment variables and other common > >> issues; they were all good. > >> Restarting the machine did not fix it. A complete uninstall/reinstall of > >> Mif2Go did not fix it. > >> Today is does not work on two different computers with different files. > >> > >> Is anyone else experiencing this? > >> It's as if my license has been revoked or some similar global denial of > >> service. > >> > >> -- > >> > >> <http://www.actifio.com/> *John Sgammato, Documentation > >> Architect* > >> *e* john.sgamm...@actifio.com *c* 508.927.2083 > >> *t* @actifiodocs <http://twitter.com/actifiodocs> > >> > >> 333 Wyman Street, Waltham, MA 02451 > >> <http://twitter.com/actifio> > >> <http://www.linkedin.com/company/399246> > >> <https://plus.google.com/102870897962348937868/posts> > >> <http://www.youtube.com/user/actifio> <http://www.actifio.com/> > >> > >> *Radically simple copy data management * > >> > >> *.* > >> > >> > >> _______________________________________________ > >> > >> > >> You are currently subscribed to framers as s...@leximation.com. > >> > >> Send list messages to framers@lists.frameusers.com. > >> > >> To unsubscribe send a blank email > toframers-unsubscr...@lists.frameusers.com > >> or visit > http://lists.frameusers.com/mailman/options/framers/sp10%40leximation.com > >> > >> Send administrative questions to listad...@frameusers.com. Visithttp:// > www.frameusers.com/ for more resources and info. > >> > >> > >> > >> _______________________________________________ > >> > >> > >> You are currently subscribed to framers as ljsims...@gmail.com. > >> > >> Send list messages to framers@lists.frameusers.com. > >> > >> To unsubscribe send a blank email to > >> framers-unsubscr...@lists.frameusers.com > >> or visit > >> > http://lists.frameusers.com/mailman/options/framers/ljsims.ml%40gmail.com > >> > >> Send administrative questions to listad...@frameusers.com. Visit > >> http://www.frameusers.com/ for more resources and info. > >> > >> > > > > > > -- > > Lin Sims > > > _______________________________________________ > You are currently subscribed to > framers. > To unsubscribe send a blank email to > http://lists.frameusers.com/mailman/listinfo/framers > Send administrative questions to listad...@frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > > End of framers Digest, Vol 106, Issue 12 > **************************************** > _______________________________________________ > > > You are currently subscribed to framers as john.sgamm...@actifio.com. > > Send list messages to framers@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/john.sgammato%40actifio.com > > Send administrative questions to listad...@frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > > > > > > -- > > > > [image: Image removed by sender.] <http://www.actifio.com/> > > > > > > > > *John Sgammato, Documentation Architect* > *e* john.sgamm...@actifio.com *c* 508.927.2083 > *t* @actifiodocs <http://twitter.com/actifiodocs> > > > > 333 Wyman Street, Waltham, MA 02451 > > [image: Image removed by sender.] <http://twitter.com/actifio> [image: > Image removed by sender.] <http://www.linkedin.com/company/399246> [image: > Image removed by sender.] > <https://plus.google.com/102870897962348937868/posts> [image: Image > removed by sender.] <http://www.youtube.com/user/actifio> [image: Image > removed by sender.] <http://www.actifio.com/> > > *Radically simple copy data management * > > *.* > -- <http://www.actifio.com/> *John Sgammato, Documentation Architect* *e* john.sgamm...@actifio.com *c* 508.927.2083 *t* @actifiodocs <http://twitter.com/actifiodocs> 333 Wyman Street, Waltham, MA 02451 <http://twitter.com/actifio> <http://www.linkedin.com/company/399246> <https://plus.google.com/102870897962348937868/posts> <http://www.youtube.com/user/actifio> <http://www.actifio.com/> *Radically simple copy data management * *.*
_______________________________________________ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
