Mollye, Try the following: In the text inset, insert empty paragraph above the text. Create the paragraph tag with a small font size (2pt), 0 spacing above and below, and import tag into the book files. Insert the text inset into the book file at an empty paragraph below the previous paragraph. The empty paragraph takes on the format of that first empty paragraph in the text inset. Regards, Joe
-----Original Message----- Date: Thu, 21 Feb 2008 10:03:32 -0600 (CST) From: "Mollye Barrett" <mol...@clearpath.cc> Subject: style following inset To: framers at lists.frameusers.com Message-ID: <36631.67.52.221.170.1203609812.squirrel at www.itobin.com> Content-Type: text/plain;charset=iso-8859-1 I'm working with an unstructured document set that uses text insets. When insets are imported into the target document, the empty paragraph tag following the inset automatically becomes a repeat of the first style in the previous inset. So, if the inset starts with a numbered list, the next empty paragraph tag in the document becomes a number list too. I know this will go away when and if the documents are structured but that is not an option right now. Can anyone recommend best practices for handling unstructured insets and/or specifically how to resolve this unwelcome problem. I seem to recall a fix but I haven't been faced with this problem for a long time. Any help is truly appreciated! Mollye Barrett ClearPath, LLC 414-331-1378 ------------------------------ Message: 10 Date: Thu, 21 Feb 2008 09:07:34 -0700 From: "Grant Hogarth" <grant.hoga...@reuters.com> Subject: RE: SYSTEC Toolbox & Deleting unused conditions throughout a book To: "Linda G. Gallagher" <lindag at techcomplus.com>, <framers at lists.frameusers.com> Message-ID: <C2C7EB4B8ECDF8489AF0286D47F0F30C0173C286 at eqmail1.equis.internal> Content-Type: text/plain; charset="us-ascii" My apologies --- it would appear that you are correct, and that I misrepresented the product. *sigh* It works so well for all the other entities, I did not think to confirm that it handled conditions. It appears that the version for FM8 *does* handle conditions, but I can't swear to it. "My bad" as the expression goes. Grant -----Original Message----- From: Linda G. Gallagher [mailto:lin...@techcomplus.com] Sent: Thursday, February 21, 2008 8:56 AM To: Grant Hogarth; framers at lists.frameusers.com Subject: RE: Deleting unused conditions throughout a book Hmm. It doesn't say that it handles conditions on the sit, and a copy I have for FM 7.0 does not. I did try to order it. I keep going around in circles, though, in the ordering process and just sent an email to their customer support. Does it really handle conditions? ~~~~~~~~~~~~~~~~~~~~~~~~~ Linda G. Gallagher TechCom Plus, LLC lindag at techcomplus dot com www.techcomplus.com 303-450-9076 or 800-500-3144 User guides, online help, FrameMaker and WebWorks ePublisher templates ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: Grant Hogarth [mailto:grant.hoga...@reuters.com] Sent: Thursday, February 21, 2008 8:22 AM To: Linda G. Gallagher; framers at lists.frameusers.com Subject: RE: Deleting unused conditions throughout a book Toolbox from SYSTEC SystemHaus will do that --- and much more. (I've no association with them other than as a very satisfied customer) www.systec-gmbh.com/toolbox Grant ----------------------------------------------------------- Grant Hogarth Senior Technical Writer Equis International - A Reuters Company +1 801 270 3180 (t) | +1 801 815 8353 (m) | +1 801 265 3999 (f) Email: grant.hogarth at reuters.com URL: www.equis.com TZ: Mountain (GMT +7) Reuters news and information reaches one billion people every day. Get the latest news at Reuters.com -----Original Message----- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Linda G. Gallagher Sent: Thursday, February 21, 2008 7:20 AM To: framers at lists.frameusers.com Subject: Deleting unused conditions throughout a book Framers, I'm just full of questions this week. I found Pgf Whopper, which lets me find and delete unused conditions on a file basis, but I'd like to know if there's a way to find and delete them throughout an entire book. My client has about 20 books and tons of conditions, many seemingly unused. The system I'm working on doesn't have FrameScript, so it's not an option right now, but might be in the future. Thanks again! ~~~~~~~~~~~~~~~~~~~~~~~~~ Linda G. Gallagher TechCom Plus, LLC lindag at techcomplus dot com www.techcomplus.com 303-450-9076 or 800-500-3144 User guides, online help, FrameMaker and WebWorks ePublisher templates ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ You are currently subscribed to Framers as Grant.Hogarth at reuters.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/grant.hogarth%40reut ers.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ------------------------------ Message: 11 Date: Thu, 21 Feb 2008 11:13:01 -0500 From: "Teasdale, Steven (GE Indust, ConsInd)" <Steven.Teasdale at ge.com> Subject: RE: style following inset To: <framers at lists.frameusers.com> Message-ID: <858744811062F54EBA94781F523097C002D6DF33 at LOUMLVEM02.e2k.ad.ge.com> Content-Type: text/plain; charset="us-ascii" Hi Mollye We have used unstructured insets and came across the same problem. As far as I am aware, the only way to handle this problem is to avoid consecutive insets. In our case, we ensure that insets represent an entire section, and are always enclosed by heading tags. For example Heading 1 <inset> Heading 2 <inset> Heading 3 <inset> Heading 3 <inset> Heading 3 <inset> Heading 2 <inset> ...etc... The obvious drawback to this is the heading text cannot be contained in the inset. I don't think there is any other way around the problem that doesn't incur formatting issues (such as those you mentioned) or using superfluous empty paragraphs to separate consecutive insets. Steven Teasdale GE Multilin -----Original Message----- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Mollye Barrett Sent: Thursday, February 21, 2008 11:04 AM To: framers at lists.frameusers.com Subject: style following inset I'm working with an unstructured document set that uses text insets. When insets are imported into the target document, the empty paragraph tag following the inset automatically becomes a repeat of the first style in the previous inset. So, if the inset starts with a numbered list, the next empty paragraph tag in the document becomes a number list too. I know this will go away when and if the documents are structured but that is not an option right now. Can anyone recommend best practices for handling unstructured insets and/or specifically how to resolve this unwelcome problem. I seem to recall a fix but I haven't been faced with this problem for a long time. Any help is truly appreciated! Mollye Barrett ClearPath, LLC 414-331-1378 _______________________________________________ You are currently subscribed to Framers as steven.teasdale at ge.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/steven.teasdale%40ge .com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ------------------------------ Message: 12 Date: Thu, 21 Feb 2008 17:25:04 +0100 From: Yves Barbion <yves.barb...@gmail.com> Subject: Re: style following inset To: mollye at clearpath.cc Cc: framers at lists.frameusers.com Message-ID: <47BDA5E0.1070805 at gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Hi Mollye, Just make sure that the paragraph which follows the text inset is not empty (if possible). If this option is not possible, for example, if the text inset is at the end of your text flow, you can do this: 1. Put a new paragraph after the text inset. 2. In this paragraph, type a single character, for example a full stop. 3. Create a dedicated paratag, for example "eoti", meaning "end of text inset" with the Color set to White in the Para Designer. 4. Apply this paratag to the paragraph with the single character. 5. Update the text inset to test it. If you also generate WebHelp or HTMLHelp output of this FM file, make sure that you set this paratag (eoti) to No Output. Good luck. Yves Barbion Documentation Architect Adobe-Certified FrameMaker Instructor Scripto Belgium Mollye Barrett wrote: > I'm working with an unstructured document set that uses text insets. When > insets are imported into the target document, the empty paragraph tag > following the inset automatically becomes a repeat of the first style in > the previous inset. So, if the inset starts with a numbered list, the next > empty paragraph tag in the document becomes a number list too. > > I know this will go away when and if the documents are structured but that > is not an option right now. Can anyone recommend best practices for > handling unstructured insets and/or specifically how to resolve this > unwelcome problem. I seem to recall a fix but I haven't been faced with > this problem for a long time. > > Any help is truly appreciated! > > > Mollye Barrett > ClearPath, LLC > 414-331-1378 > _______________________________________________ > > > You are currently subscribed to Framers as yves.barbion at gmail.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit http://lists.frameusers.com/mailman/options/framers/yves.barbion%40gmail .com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > > ------------------------------ Message: 13 Date: Thu, 21 Feb 2008 09:30:28 -0700 From: "Combs, Richard" <richard.co...@polycom.com> Subject: RE: style following inset To: <mollye at clearpath.cc>, <framers at lists.frameusers.com> Message-ID: <AABEB232F95338499DF8F513EE2B2C78A69D92 at WSTEXCH00.westminster.polycom.co m> Content-Type: text/plain; charset="us-ascii" Mollye Barrett wrote: > I'm working with an unstructured document set that uses text > insets. When insets are imported into the target document, > the empty paragraph tag following the inset automatically > becomes a repeat of the first style in the previous inset. > So, if the inset starts with a numbered list, the next empty > paragraph tag in the document becomes a number list too. That "empty" pgf isn't really empty. It's the _container_ pgf into which you imported the text inset. If you click the inset to select it, you'll see from the highlighting that it sits in that pgf. There's an _extra_ pgf break because the text inset itself ends with a paragraph break. Enough context. The fix is simple: Put something -- anything -- between the text inset and the end of its container pgf. For existing text insets, position the cursor between the the text inset and the pilcrow (end-of-pgf symbol) of the container pgf and type something. I use a non-breaking space (Ctrl-Space) so that there's a little symbol there (I always work with View > Symbols on), and it's less likely to be accidentally deleted. Change the pgf format to whatever you want (I have a special format I use as a text inset container) and update the text inset. The container pgf remains unchanged. For a new text inset, if the text cursor is in an empty pgf when you import the inset, the inset will "sit" up against the pilcrow and cause your problem. Type the Ctrl-Space first, then move the cursor to the left of it before importing the inset. Or consider importing the inset with the cursor at the beginning of a non-empty pgf (i.e., to the left of some text). HTH! Richard ------ Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 ------ rgcombs AT gmailDOTcom 303-777-0436 ------ ------------------------------ Message: 14 Date: Thu, 21 Feb 2008 10:58:11 -0600 (CST) From: "Mollye Barrett" <mol...@clearpath.cc> Subject: RE: style following inset To: framers at lists.frameusers.com Message-ID: <42344.67.52.221.170.1203613091.squirrel at www.itobin.com> Content-Type: text/plain;charset=iso-8859-1 Thanks all. You've jogged my memory with details and I'll give the fixes a try on this doc set. Mollye Barrett ClearPath, LLC 414-331-1378 ------------------------------ Message: 15 Date: Thu, 21 Feb 2008 09:38:38 -0800 (PST) From: Rene Stephenson <rinn...@yahoo.com> Subject: Re: style following inset To: mollye at clearpath.cc, framers at lists.frameusers.com Message-ID: <979522.38667.qm at web33510.mail.mud.yahoo.com> Content-Type: text/plain; charset=us-ascii We have the same problem and have heard it's just a bug w/ FM 7.2 unstructured insets. Our solution is to use Silicon Prairie's Paragraph Tools to Remove Paragraph Overrides immediately before generating the book for our output formats. Rene L. Stephenson ----- Original Message ---- From: Mollye Barrett <mol...@clearpath.cc> To: framers at lists.frameusers.com Sent: Thursday, February 21, 2008 11:03:32 AM Subject: style following inset I'm working with an unstructured document set that uses text insets. When insets are imported into the target document, the empty paragraph tag following the inset automatically becomes a repeat of the first style in the previous inset. So, if the inset starts with a numbered list, the next empty paragraph tag in the document becomes a number list too. I know this will go away when and if the documents are structured but that is not an option right now. Can anyone recommend best practices for handling unstructured insets and/or specifically how to resolve this unwelcome problem. I seem to recall a fix but I haven't been faced with this problem for a long time. Any help is truly appreciated! Mollye Barrett ClearPath, LLC 414-331-1378 _______________________________________________ You are currently subscribed to Framers as rinnie1 at yahoo.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/rinnie1%40yahoo.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ------------------------------ Message: 16 Date: Thu, 21 Feb 2008 18:48:19 +0100 From: Peter Ring <p...@ddf.dk> Subject: Re: Scripting pulling FM files from version control and creating PDFs To: "Linda G. Gallagher" <lindag at techcomplus.com> Cc: framers at lists.frameusers.com Message-ID: <47BDB963.3060803 at ddf.dk> Content-Type: text/plain; charset=ISO-8859-1; format=flowed DZBatcher, http://www.datazone.com/dzbatcher2.html is your friend. kind regards Peter Ring Linda G. Gallagher wrote: > Framers, > > A client would like to be able to have a script that runs nightly that will > do the following: > > - Pull FM files and books from their version control system (PVCS) > > - Maybe set conditions (not sure if this is needed yet) > > - Update the books > > - Create PDFs of books and some stand-alone files > > - Put the resulting PDFs in a specific place for the nightly build > > It seems like fmbatch can do this, but I think it only works with FM for > Unix (they have FM for Win). > > Can any of the other FDK tools do this? (An in-house developer will likely > write the script.) > > What about FrameScript? > > What tool is best? > > Thanks for your help! > > ~~~~~~~~~~~~~~~~~~~~~~~~~ > Linda G. Gallagher > TechCom Plus, LLC > lindag at techcomplus dot com > www.techcomplus.com > 303-450-9076 or 800-500-3144 > User guides, online help, FrameMaker and > WebWorks ePublisher templates > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > _______________________________________________ > > > You are currently subscribed to Framers as pri at ddf.dk. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit http://lists.frameusers.com/mailman/options/framers/pri%40ddf.dk > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > ------------------------------ Message: 17 Date: Thu, 21 Feb 2008 11:51:05 -0600 (CST) From: "Mollye Barrett" <mol...@clearpath.cc> Subject: Re: style following inset To: "Rene Stephenson" <rinnie1 at yahoo.com> Cc: framers at lists.frameusers.com Message-ID: <55535.67.52.221.170.1203616265.squirrel at www.itobin.com> Content-Type: text/plain;charset=iso-8859-1 I'm using FM 8. I'll try the override tool and see what happens. Thanks, Mollye > We have the same problem and have heard it's just a bug w/ FM 7.2 > unstructured insets. Our solution is to use Silicon Prairie's Paragraph > Tools to Remove Paragraph Overrides immediately before generating the book > for our output formats. > > Rene L. Stephenson > > > > > > > ----- Original Message ---- > From: Mollye Barrett <mollye at clearpath.cc> > To: framers at lists.frameusers.com > Sent: Thursday, February 21, 2008 11:03:32 AM > Subject: style following inset > > I'm working with an unstructured document set that uses text insets. When > insets are imported into the target document, the empty paragraph tag > following the inset automatically becomes a repeat of the first style in > the previous inset. So, if the inset starts with a numbered list, the next > empty paragraph tag in the document becomes a number list too. > > I know this will go away when and if the documents are structured but that > is not an option right now. Can anyone recommend best practices for > handling unstructured insets and/or specifically how to resolve this > unwelcome problem. I seem to recall a fix but I haven't been faced with > this problem for a long time. > > Any help is truly appreciated! > > > Mollye Barrett > ClearPath, LLC > 414-331-1378 > _______________________________________________ > > > You are currently subscribed to Framers as rinnie1 at yahoo.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/rinnie1%40yahoo.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > > > > Mollye Barrett ClearPath, LLC 414-331-1378 ------------------------------ Message: 18 Date: Thu, 21 Feb 2008 11:22:54 -0700 From: "Combs, Richard" <richard.co...@polycom.com> Subject: RE: style following inset To: "Rene Stephenson" <rinnie1 at yahoo.com>, <mollye at clearpath.cc>, <framers at lists.frameusers.com> Message-ID: <AABEB232F95338499DF8F513EE2B2C78A69D93 at WSTEXCH00.westminster.polycom.co m> Content-Type: text/plain; charset="us-ascii" Rene Stephenson > We have the same problem and have heard it's just a bug w/ FM > 7.2 unstructured insets. Our solution is to use Silicon > Prairie's Paragraph Tools to Remove Paragraph Overrides > immediately before generating the book for our output formats. It's not a bug specific to 7.2, this behavior has existed forever. I suspect it's related to the bug that produces a pgf override when a char format abuts up against the pilcrow (end-of-pgf marker). There's no need for tools or repeated fixes. See my earlier post about separating the text inset from the pilcrow with a space (or something). That will eliminate the problem once and for all. Richard ------ Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 ------ rgcombs AT gmailDOTcom 303-777-0436 ------ ------------------------------ Message: 19 Date: Thu, 21 Feb 2008 20:28:48 +0200 From: Shmuel Wolfson <s...@actcom.com> Subject: Re: Scripting pulling FM files from version control and creating PDFs To: Peter Ring <pri at ddf.dk> Cc: framers at lists.frameusers.com Message-ID: <47BDC2E0.5060708 at actcom.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed It says on the page you provided below: DZbatcher is currently available for Windows NT 4.0, Windows 2000, Sun Solaris 2.6 and AIX, and FrameMaker or FrameMaker+SGML (versions 5.5.6 or above), must be installed on your host system. What about Windows XP and Vista? Are they supported? Also, is it easy to use? Regards, Shmuel Wolfson Peter Ring wrote: > DZBatcher, > > http://www.datazone.com/dzbatcher2.html > > is your friend. > > kind regards > Peter Ring > > Linda G. Gallagher wrote: > >> Framers, >> >> A client would like to be able to have a script that runs nightly that will >> do the following: >> >> - Pull FM files and books from their version control system (PVCS) >> >> - Maybe set conditions (not sure if this is needed yet) >> >> - Update the books >> >> - Create PDFs of books and some stand-alone files >> >> - Put the resulting PDFs in a specific place for the nightly build >> >> It seems like fmbatch can do this, but I think it only works with FM for >> Unix (they have FM for Win). >> >> Can any of the other FDK tools do this? (An in-house developer will likely >> write the script.) >> >> What about FrameScript? >> >> What tool is best? >> >> Thanks for your help! >> >> ~~~~~~~~~~~~~~~~~~~~~~~~~ >> Linda G. Gallagher >> TechCom Plus, LLC >> lindag at techcomplus dot com >> www.techcomplus.com >> 303-450-9076 or 800-500-3144 >> User guides, online help, FrameMaker and >> WebWorks ePublisher templates >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> >> >> >> _______________________________________________ >> >> >> You are currently subscribed to Framers as pri at ddf.dk. >> >> Send list messages to framers at lists.frameusers.com. >> >> To unsubscribe send a blank email to >> framers-unsubscribe at lists.frameusers.com >> or visit http://lists.frameusers.com/mailman/options/framers/pri%40ddf.dk >> >> Send administrative questions to listadmin at frameusers.com. Visit >> http://www.frameusers.com/ for more resources and info. >> >> > _______________________________________________ > > > You are currently subscribed to Framers as sbw at actcom.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit http://lists.frameusers.com/mailman/options/framers/sbw%40actcom.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > > ------------------------------ Message: 20 Date: Thu, 21 Feb 2008 10:54:38 -0800 (PST) From: Rene Stephenson <rinn...@yahoo.com> Subject: Re: style following inset To: "Combs, Richard" <richard.combs at Polycom.com>, mollye at clearpath.cc, framers at lists.frameusers.com Message-ID: <424897.25645.qm at web33513.mail.mud.yahoo.com> Content-Type: text/plain; charset=us-ascii Glad to learn that. (Had to dig the reply out of my spam folder where it had gotten misrouted by my spam filter.) Rene L. Stephenson ----- Original Message ---- From: "Combs, Richard" <richard.co...@polycom.com> To: Rene Stephenson <rinnie1 at yahoo.com>; mollye at clearpath.cc; framers at lists.frameusers.com Sent: Thursday, February 21, 2008 1:22:54 PM Subject: RE: style following inset Rene Stephenson > We have the same problem and have heard it's just a bug w/ FM > 7.2 unstructured insets. Our solution is to use Silicon > Prairie's Paragraph Tools to Remove Paragraph Overrides > immediately before generating the book for our output formats. It's not a bug specific to 7.2, this behavior has existed forever. I suspect it's related to the bug that produces a pgf override when a char format abuts up against the pilcrow (end-of-pgf marker). There's no need for tools or repeated fixes. See my earlier post about separating the text inset from the pilcrow with a space (or something). That will eliminate the problem once and for all. Richard ------ Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 ------ rgcombs AT gmailDOTcom 303-777-0436 ------ ------------------------------ Message: 21 Date: Thu, 21 Feb 2008 13:50:22 -0600 From: "Deirdre Reagan" <deirdre.rea...@gmail.com> Subject: question about cross-references To: "Frame Users" <framers at lists.frameusers.com> Message-ID: <ac6165d80802211150i4a970b94g1e3642f8767c0ffe at mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Friends! Countrymen! Frame Users! Good day to you from rainy southern Alabama! Thank to you Texas, Loiusiana and Mississippi (which is ALWAYS fun to type!) for sharing this rain-making event! On to the question --- In my Introduction, I have three interrelated elements: A. a paragraph that lists all the chapters B. a table that lists all the chapters and their page blocks C. individual paragraphs to describe the content of each chapter Sometime we use all the chapters, some times we don't. So, if we are writing a document and using only four of the five chapters, I have to delete the chapter name from (A), the chapter name from (B), and the chapter description paragraph(C). Would it be possible, using cross-references, to generate (A) and (B) by cross-referencing the headings for (C)? I tried it, and when I deleted one of the paragraphs from (C), the chapter name in (A) and (B) also disappeared, but one of the other chapter names duplicated itself. Any thoughts? Thanks! Deirdre ------------------------------ Message: 22 Date: Thu, 21 Feb 2008 11:53:41 -0800 (PST) From: Rene Stephenson <rinn...@yahoo.com> Subject: Re: style following inset To: "Combs, Richard" <richard.combs at Polycom.com>, mollye at clearpath.cc, framers at lists.frameusers.com Message-ID: <180528.4633.qm at web33506.mail.mud.yahoo.com> Content-Type: text/plain; charset=us-ascii OK, bear with me - What about the situation where you have a text inset that's just a sentence, and there's no trailing paragraph break in the inset, and you want to use the sentence mid-paragraph elsewhere? I can't seem to get the inset sentence to flow to the next sentence without a paragraph break showing up in the container doc that's not in the inset. It's like the file end character (that doubled-S squiggle thing) makes FM put a paragraph break there regardless of what I put after the inset marker. Is that just functioning as designed, and I'm not supposed to be able to use an inset that way? (...in which case, maybe a user variable is a better answer if it's just a sentence we need to reuse mid-paragraph...?) How about when you have the inset preceding a paragraph of body text, and the last paragraph of the inset is supposed to be a numbered list, but the numbering won't hold if you follow the text inset with anything other than a numbered list? Rene L. Stephenson ----- Original Message ---- From: "Combs, Richard" <richard.co...@polycom.com> To: Rene Stephenson <rinnie1 at yahoo.com>; mollye at clearpath.cc; framers at lists.frameusers.com Sent: Thursday, February 21, 2008 1:22:54 PM Subject: RE: style following inset Rene Stephenson > We have the same problem and have heard it's just a bug w/ FM > 7.2 unstructured insets. Our solution is to use Silicon > Prairie's Paragraph Tools to Remove Paragraph Overrides > immediately before generating the book for our output formats. It's not a bug specific to 7.2, this behavior has existed forever. I suspect it's related to the bug that produces a pgf override when a char format abuts up against the pilcrow (end-of-pgf marker). There's no need for tools or repeated fixes. See my earlier post about separating the text inset from the pilcrow with a space (or something). That will eliminate the problem once and for all. Richard ------ Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 ------ rgcombs AT gmailDOTcom 303-777-0436 ------ ------------------------------ Message: 23 Date: Thu, 21 Feb 2008 11:59:17 -0800 (PST) From: Rene Stephenson <rinn...@yahoo.com> Subject: Re: Deleting unused conditions throughout a book To: "Linda G. Gallagher" <lindag at techcomplus.com>, Grant Hogarth <Grant.Hogarth at Reuters.com>, framers at lists.frameusers.com Message-ID: <251470.9512.qm at web33506.mail.mud.yahoo.com> Content-Type: text/plain; charset=us-ascii Systec doesn't, but this does: * If you don't have FrameScript engine: http://www.frameexpert.com/plugins/findchangespecial/index.htm * Even more powerful version if you do have FrameScript engine: FindChangeFormatsBatch.fsl (from the same developer - ask Rick at FrameExpert.com for pricing) Rene L. Stephenson ----- Original Message ---- From: Linda G. Gallagher <lin...@techcomplus.com> To: Grant Hogarth <Grant.Hogarth at Reuters.com>; framers at lists.frameusers.com Sent: Thursday, February 21, 2008 10:55:49 AM Subject: RE: Deleting unused conditions throughout a book Hmm. It doesn't say that it handles conditions on the sit, and a copy I have for FM 7.0 does not. I did try to order it. I keep going around in circles, though, in the ordering process and just sent an email to their customer support. Does it really handle conditions? ~~~~~~~~~~~~~~~~~~~~~~~~~ Linda G. Gallagher TechCom Plus, LLC lindag at techcomplus dot com www.techcomplus.com 303-450-9076 or 800-500-3144 User guides, online help, FrameMaker and WebWorks ePublisher templates ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: Grant Hogarth [mailto:grant.hoga...@reuters.com] Sent: Thursday, February 21, 2008 8:22 AM To: Linda G. Gallagher; framers at lists.frameusers.com Subject: RE: Deleting unused conditions throughout a book Toolbox from SYSTEC SystemHaus will do that --- and much more. (I've no association with them other than as a very satisfied customer) www.systec-gmbh.com/toolbox Grant ----------------------------------------------------------- Grant Hogarth Senior Technical Writer Equis International - A Reuters Company +1 801 270 3180 (t) | +1 801 815 8353 (m) | +1 801 265 3999 (f) Email: grant.hogarth at reuters.com URL: www.equis.com TZ: Mountain (GMT +7) Reuters news and information reaches one billion people every day. Get the latest news at Reuters.com -----Original Message----- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Linda G. Gallagher Sent: Thursday, February 21, 2008 7:20 AM To: framers at lists.frameusers.com Subject: Deleting unused conditions throughout a book Framers, I'm just full of questions this week. I found Pgf Whopper, which lets me find and delete unused conditions on a file basis, but I'd like to know if there's a way to find and delete them throughout an entire book. My client has about 20 books and tons of conditions, many seemingly unused. The system I'm working on doesn't have FrameScript, so it's not an option right now, but might be in the future. Thanks again! ~~~~~~~~~~~~~~~~~~~~~~~~~ Linda G. Gallagher TechCom Plus, LLC lindag at techcomplus dot com www.techcomplus.com 303-450-9076 or 800-500-3144 User guides, online help, FrameMaker and WebWorks ePublisher templates ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ You are currently subscribed to Framers as Grant.Hogarth at reuters.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/grant.hogarth%40reut ers.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _______________________________________________ You are currently subscribed to Framers as rinnie1 at yahoo.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/rinnie1%40yahoo.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ------------------------------ Message: 24 Date: Thu, 21 Feb 2008 15:01:31 -0500 From: "Charles Beck" <charles.b...@infor.com> Subject: RE: question about cross-references To: "Deirdre Reagan" <deirdre.reagan at gmail.com>, "Frame Users" <framers at lists.frameusers.com> Message-ID: <CBF89B2595C3274CB7B1F0B199CCF7F802C242EF at usalwexmb1.infor.com> Content-Type: text/plain; charset="us-ascii" Hi Deirdre, from beautiful sunny-but-frosty-and-snowy-cold Ohio (where we're never quite sure who to blame--er, THANK for sharing their weather with us), I'm not quite I understand why or how you want to use the cross references, but I think maybe you're headed up the wrong alley. If I understand your situation correctly, I think perhaps a better solution would be to use conditionalized text and settings for all three elements. That way, all you have to do come time to publish is to turn show/hide the appropriate conditional text settings. The only other thing you would need to worry about then would be having a different book file for each output, one that has all the chapters, the other that includes only a subset. Clear as mud? Let me know if you need further pointers. Chuck Beck Sr. Technical Writer | Infor | Office: 614.523.7302 | Charles.Beck at infor.com -----Original Message----- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Deirdre Reagan Sent: Thursday, February 21, 2008 14:50 To: Frame Users Subject: question about cross-references Friends! Countrymen! Frame Users! Good day to you from rainy southern Alabama! Thank to you Texas, Loiusiana and Mississippi (which is ALWAYS fun to type!) for sharing this rain-making event! On to the question --- In my Introduction, I have three interrelated elements: A. a paragraph that lists all the chapters B. a table that lists all the chapters and their page blocks C. individual paragraphs to describe the content of each chapter Sometime we use all the chapters, some times we don't. So, if we are writing a document and using only four of the five chapters, I have to delete the chapter name from (A), the chapter name from (B), and the chapter description paragraph(C). Would it be possible, using cross-references, to generate (A) and (B) by cross-referencing the headings for (C)? I tried it, and when I deleted one of the paragraphs from (C), the chapter name in (A) and (B) also disappeared, but one of the other chapter names duplicated itself. Any thoughts? Thanks! Deirdre _______________________________________________ You are currently subscribed to Framers as Charles.Beck at infor.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/charles.beck%40infor .com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ------------------------------ Message: 25 Date: Thu, 21 Feb 2008 14:11:28 -0600 From: "Kelly McDaniel" <kmcdan...@pavtech.com> Subject: cleanup To: <framers at lists.frameusers.com> Message-ID: <A60F02215814C943AF426D7E0AF3BCB901640F7D at pav12exc.corp.pavtech.com> Content-Type: text/plain; charset="US-ASCII" I have about a dozen books of various ages, authors, formatting, etc. The tag catalogs are different from file-to-file, and from book-to-book. I am in the process of fixing this. I want to make all Paragraph catalogs the same within all files. I know the long ways to do this. Is there a bulk method? ------------------------------ Message: 26 Date: Thu, 21 Feb 2008 14:27:36 -0600 (CST) From: "Mollye Barrett" <mol...@clearpath.cc> Subject: Re: cleanup To: "Kelly McDaniel" <kmcdaniel at pavtech.com> Cc: framers at lists.frameusers.com Message-ID: <35782.67.52.221.170.1203625656.squirrel at www.itobin.com> Content-Type: text/plain;charset=iso-8859-1 In the past I used template mapper but can't seem to find it now. Mollye Mollye Barrett ClearPath, LLC 414-331-1378 > I have about a dozen books of various ages, authors, formatting, etc. > The tag catalogs are different from file-to-file, and from book-to-book. > I am in the process of fixing this. > > > > I want to make all Paragraph catalogs the same within all files. I know > the long ways to do this. Is there a bulk method? > > _______________________________________________ > > > You are currently subscribed to Framers as mollye at clearpath.cc. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/mollye%40clearpath.c c > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > ------------------------------ Message: 27 Date: Thu, 21 Feb 2008 15:29:19 -0500 From: "Art Campbell" <art.campb...@gmail.com> Subject: Re: cleanup To: "Kelly McDaniel" <kmcdaniel at pavtech.com>, "Frame Users" <framers at lists.frameusers.com> Message-ID: <c7d9dd600802211229q427ace22o826a4f3bf11082e5 at mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 You can certainly do it book-to-book. And you can also add all the component files to a meta-book and update them all in one pass. However, the FM method doesn't remove the old tags -- it just updates. So I'd look at CleanImport, which works with all formats, and also removes the old ones -- a really nice touch when you're trying to make things consistent. from http://www.electropubs.com/ez_cleanimport3.html Art On Thu, Feb 21, 2008 at 3:11 PM, Kelly McDaniel <kmcdaniel at pavtech.com> wrote: > I have about a dozen books of various ages, authors, formatting, etc. > The tag catalogs are different from file-to-file, and from book-to-book. > I am in the process of fixing this. > > > > I want to make all Paragraph catalogs the same within all files. I know > the long ways to do this. Is there a bulk method? > > _______________________________________________ > -- Art Campbell art.campbell at gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 ------------------------------ Message: 28 Date: Thu, 21 Feb 2008 14:53:41 -0700 From: "Combs, Richard" <richard.co...@polycom.com> Subject: RE: style following inset To: "Rene Stephenson" <rinnie1 at yahoo.com>, <framers at lists.frameusers.com> Message-ID: <AABEB232F95338499DF8F513EE2B2C78A69D94 at WSTEXCH00.westminster.polycom.co m> Content-Type: text/plain; charset="us-ascii" Rene Stephenson wrote: > OK, bear with me - What about the situation where you have a > text inset that's just a sentence, and there's no trailing > paragraph break in the inset, and you want to use the > sentence mid-paragraph elsewhere? I can't seem to get the > inset sentence to flow to the next sentence without a > paragraph break showing up in the container doc that's not in > the inset. It's like the file end character (that doubled-S > squiggle thing) makes FM put a paragraph break there > regardless of what I put after the inset marker. Is that just > functioning as designed, and I'm not supposed to be able to > use an inset that way? (...in which case, maybe a user > variable is a better answer if it's just a sentence we need > to reuse mid-paragraph...?) The squiggle thing is an end-of-flow symbol. A text inset is never just a sentence, it's always an entire flow (of course, there may have only one sentence -- or word -- in the flow). When the source is an FM file, this is explicit in the dialog box, Import Text Flow by Reference, where you can select which flow in the source doc to import. A flow always contains one or more pgfs. So a one-sentence flow is also a one-pgf flow; you can't avoid the pgf end. But you should be able to (I haven't tried it) define the source pgf as a Run-In Head so that there's no break after it. Here's another idea: Save your sentence as a text file and import that by reference. In the Import Text File by Reference dialog, select Merge Lines into Paragraphs. FM inserts the entire sentence at the cursor location, and it assumes the formatting of the container pgf. > How about when you have the inset preceding a paragraph of > body text, and the last paragraph of the inset is supposed to > be a numbered list, but the numbering won't hold if you > follow the text inset with anything other than a numbered list? Now, that one I've never seen. Sorry, I don't have a clue; that shouldn't happen. :-( Richard ------ Richard G. Combs Senior Technical Writer Polycom, Inc. richardDOTcombs AT polycomDOTcom 303-223-5111 ------ rgcombs AT gmailDOTcom 303-777-0436 ------ ------------------------------ Message: 29 Date: Thu, 21 Feb 2008 17:34:21 -0500 From: Fred Ridder <docu...@hotmail.com> Subject: RE: style following inset To: "Combs, Richard" <richard.combs at polycom.com>, Rene Stephenson <rinnie1 at yahoo.com>, <framers at lists.frameusers.com> Message-ID: <BAY106-W157C2B2A797032CB107013BA1C0 at phx.gbl> Content-Type: text/plain; charset="iso-8859-1" In response to Rene Stephenson, Richard Combs wrote (in part):> A flow always contains one or more pgfs. So a one-sentence flow is also > a one-pgf flow; you can't avoid the pgf end. But you should be able to > (I haven't tried it) define the source pgf as a Run-In Head so that > there's no break after it. > > Here's another idea: Save your sentence as a text file and import that > by reference. In the Import Text File by Reference dialog, select Merge > Lines into Paragraphs. FM inserts the entire sentence at the cursor > location, and it assumes the formatting of the container pgf. It's actually much easier (and better) than that! What you need to do is select the "Reformat as Plain Text" option in the Import Text Flow by Reference dialog. As long as the source flow contains only an end-of- flow mark (i.e. does not contain a paragraph mark), the text will be imported into your target document as a plain text string, without any end-of-flow mark. This means you can put sub-paragraph insets *anywhere*, even multiple ones in the same paragraph. The only shortcoming of this approach is that you can't bring along any ormatting; the inset only contains plain text, but you *can* format the whole inset in the container doc. At my last employer, I implemented this kind of system for the titles of all the books in our System Release Bookshelf (about 50 titles), and all writers were supposed to use text insets rather typing the titles so that everybody's references would stay in sync when any of the titles changed. We just had to apply the "TitleRef" character tag to italicize the titles after performing the insert. Another point to note if you are dealing with short insets is that they do not always have to be in separate files. My system used a multi-flow source document that had all 50 book titles in separately defined, named text flows. Just remember to keep the flow names short unless you feel like using Resource Editor to make the list box wider in the Import Flow dialog. -Fred Ridder _________________________________________________________________ Helping your favorite cause is as easy as instant messaging.?You IM, we give. http://im.live.com/Messenger/IM/Home/?source=text_hotmail_join ------------------------------ Message: 30 Date: Fri, 22 Feb 2008 00:53:36 +0100 From: Peter Ring <p...@ddf.dk> Subject: Re: Scripting pulling FM files from version control and creating PDFs To: Shmuel Wolfson <sbw at actcom.com> Cc: framers at lists.frameusers.com Message-ID: <47BE0F00.8030302 at ddf.dk> Content-Type: text/plain; charset=ISO-8859-1; format=flowed First, in case Dov or someone else from Adobe doesn't step in here, please observe that there is a legal limit to how you can use current FrameMaker versions unattended without a server license (http://www.adobe.com/products/fmserver/). As far as I can tell, the "Adobe? FrameMaker? Server 8 software extends the power of Adobe FrameMaker 8 software" only in terms of the license and the price tag; ie., technically it is no different from the desktop edition. Anyway, a completely automated pagination service would probably require the server license. I have not tried using DZBatcher with FrameMaker 8 yet. I'd love to hear about it :) Don't know about Vista either. We avoid it like the plague for now. DZBatcher is OK with Windows XP. Is it easy to use? Well, it does what it is supposed to do, which isn't much compared to more complete FrameMaker scripting environments like FrameScript. DZBatcher controls a few important FrameMaker functions, and is meant to be invoked from a shell script. Use your preferred scripting language to do the checkout, write the DZBatcher scripts, and invoke DZBatcher. DZBatcher, being a command line tool, can read commands piped in from stdin (and write to stdout). But pipes doesn't work all that well on Windows, so I have DZBatcher read the commands from a file. I tend to drive the process from a Makefile. Your in-house developer knows about 'make' <http://en.wikipedia.org/wiki/Makefile>. If she doesn't, then please ask me for more information. There are a few alternatives somewhat similar in scope to DZBatcher. - The 'runfm' command from Omsys Mif2Go http://www.omsys.com/dcl/xhtml/runfm.htm See for example http://www.omsys.com/dcl/xhtml/runfm_0016_3433runningasinglemif2goconver sionorprintjob.htm Download the demo version of Mif2Go to try out 'runfm' http://www.omsys.com/dcl/download.htm - CudSpan DoBatch, available from Leximation http://www.leximation.com/toolsearch/?dev=CUD DoBatch expects you to open a batch script file interactively. Kind regards Peter Ring Shmuel Wolfson wrote: > It says on the page you provided below: > > DZbatcher is currently available for Windows NT 4.0, Windows 2000, Sun > Solaris 2.6 and AIX, and FrameMaker or FrameMaker+SGML (versions 5.5.6 > or above), must be installed on your host system. > > What about Windows XP and Vista? Are they supported? > Also, is it easy to use? > > Regards, > Shmuel Wolfson > > > > Peter Ring wrote: >> DZBatcher, >> >> http://www.datazone.com/dzbatcher2.html >> >> is your friend. >> >> kind regards >> Peter Ring >> >> Linda G. Gallagher wrote: >> >>> Framers, >>> >>> A client would like to be able to have a script that runs nightly >>> that will >>> do the following: >>> >>> - Pull FM files and books from their version control system (PVCS) >>> >>> - Maybe set conditions (not sure if this is needed yet) >>> >>> - Update the books >>> >>> - Create PDFs of books and some stand-alone files >>> >>> - Put the resulting PDFs in a specific place for the nightly build >>> >>> It seems like fmbatch can do this, but I think it only works with FM for >>> Unix (they have FM for Win). >>> Can any of the other FDK tools do this? (An in-house developer will >>> likely >>> write the script.) >>> >>> What about FrameScript? >>> >>> What tool is best? >>> >>> Thanks for your help! >>> >>> ~~~~~~~~~~~~~~~~~~~~~~~~~ >>> Linda G. Gallagher >>> TechCom Plus, LLC >>> lindag at techcomplus dot com >>> www.techcomplus.com >>> 303-450-9076 or 800-500-3144 >>> User guides, online help, FrameMaker and >>> WebWorks ePublisher templates >>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >>> >>> >>> >>> _______________________________________________ >>> >>> >>> You are currently subscribed to Framers as pri at ddf.dk. >>> >>> Send list messages to framers at lists.frameusers.com. >>> >>> To unsubscribe send a blank email to >>> framers-unsubscribe at lists.frameusers.com >>> or visit >>> http://lists.frameusers.com/mailman/options/framers/pri%40ddf.dk >>> >>> Send administrative questions to listadmin at frameusers.com. Visit >>> http://www.frameusers.com/ for more resources and info. >>> >>> >> _______________________________________________ >> >> >> You are currently subscribed to Framers as sbw at actcom.com. >> >> Send list messages to framers at lists.frameusers.com. >> >> To unsubscribe send a blank email to >> framers-unsubscribe at lists.frameusers.com >> or visit >> http://lists.frameusers.com/mailman/options/framers/sbw%40actcom.com >> >> Send administrative questions to listadmin at frameusers.com. Visit >> http://www.frameusers.com/ for more resources and info. >> >> > ------------------------------ Message: 31 Date: Fri, 22 Feb 2008 11:13:01 +1100 From: Hedley Finger <hfin...@handholding.com.au> Subject: RE: FrameMaker 8 won't import SVG graphics correctly To: "Frame Users" <framers at lists.frameusers.com>, <framemaker-dita at yahoogroups.com> Cc: Ursula McCloy <Ursula.McCloy at peergroup.com> Message-ID: <20080222015453.FAGZ8735.oaamta04ps.mx.bigpond.com at handholding.handholdi ng.com.au> Content-Type: text/plain; charset="us-ascii"; format=flowed Ursula: At Friday, 22/02/2008, 02:29 AM;, you wrote: >Hi, Headley Hedley >I didn't see a reply to your very interesting question on the >list... [FrameMaker 8 won't import SVG graphics correctly] ... did >you get any useful feedback privately? An Adobe employee emailed me that this was a bug dating back to FM 7.0. The Inkscape-created graphic displays correctly in a number of SVG viewers, so it is definitely a FM problem. I am beginning to think that grouped objects in SVG have a transparent fill and FM has never been able to handle transparency but translates it to white. (Since FM 3.0; how about fixing it, Adobe?) I will test whether it can be "fixed" by changing stacking order or using layers. Also, it may render correctly to PDF as I believe Acrobat references the original SVG, not the pixmap or FrameImage conversion in FM. Come to think of it, I specified that all graphics are to include a FrameImage facet, so perhaps switching that off might be a solution. Watch this space for results of tests ... >We've not moved to FM/DITA >yet, ... but the lack of support for FM >callouts would be unhappy if there is a problem with text in embedded >graphics. The nice part about SVG is that you can embed or reference PNG for screen captures and then add leader lines and callout text which is editable. As it is XML itself, it can be imported into other XML editors and tools. Since FM DITA does not allow compound graphics (e.g. an anchored frame containing two or three pixmaps, some text, and drawn lines and shapes), SVG seemed like a good way to go as you can double-click on the graphic and up comes Inkscape (or Sketsa, or Illustrator, etc.) to edit and save. >Perhaps too simplistic, but what about embedding as a PNG rather than an >SVG? Inkscape (Sketsa, etc) saves to PNG so this is doable, just not as convenient. >Or using another program other than Inkscape to add the callouts? Illustrator, perhaps. >Finally, though less optimally, what about handling it all in a bitmap >format with the original text/callouts created at the correct size? No way; what if you have to edit the text? Regards, Hedley <-------- -- Hedley Stewart Finger 28 Regent Street Camberwell VIC 3124 Australia Tel. +61 3 9809 1229 Mobile +61 412 461 558, E-mail <mailto:hfinger at handholding.com.au> ------------------------------ Message: 32 Date: Fri, 22 Feb 2008 13:25:09 +1100 From: Hedley Finger <hfin...@handholding.com.au> Subject: SOLUTION -- PERHAPS [was "RE: FrameMaker 8 won't import SVG graphics correctly"] To: "Frame Users" <framers at lists.frameusers.com>, framemaker-dita at yahoogroups.com Message-ID: <20080222022504.DJJI16012.oaamta05ps.mx.bigpond.com at handholding.handhold ing.com.au> Content-Type: text/plain; charset="us-ascii"; format=flowed All: Original SVG from Inkscape consists of a screen capture to PNG plus some thin lines and some TrueType text. @ Direct import of *.svg by FrameMaker = strange white rectangles partially obscuring part of graphic. Thickness of hair lines varies. Appears to embed graphic as JPEG, thus introducing all the usual edge contrast distortions. FrameMaker document doesn't print to PDF via Adobe PDF virtual printer all that well. @ Print to PDF from Inkscape via Adobe PDF produces a result similar to the above. When PFD imported into FM, JPEG distortion carried through to PDF printed with Adobe PDF from FrameMaker. @ Save to PDF from Inkscape seems to encapsulate pixmap as PNG with NO artifacts. When PDF imported into FM, quality of pixmap excellent, hairlines slightly thickened but all of even thickness, and type appears slightly bolder on screen. When FM doc printed to PDF via Adobe PDF, resultant pixmpap + hairlines + type looks best of all. Type appears as its correct weight, so the thickening of type in FM is perhaps due to it being converted to a pixmap or FrameImage for display. Recommendation: When producing combination graphics in Inkscape consisting of embedded or referenced pixmaps, SVG vector objects, and text, save to PDF from Inkscape. Then import the PDF as a graphic into FrameMaker. This overcomes the prohibition against FM type combination graphics being included in XML files. You might get a better result if the TrueType or PS fonts are converted to vector paths as this automatically "embeds" the "font" vector objects into the graphic. Note: Inkscape does not yet support SVG fonts but none of the editors do at this stage, so converting PS or TrueType to SVG fonts not an option at this stage. The Java-based collection of SVG tools called Batik can convert fonts to SVG fonts but what then if editors can't use them. Handy for programmers, I suppose, creating forms and notices programmatically. Happy lathering, customers! Regards, Hedley -- Hedley Stewart Finger 28 Regent Street Camberwell VIC 3124 Australia Tel. +61 3 9809 1229 Mobile +61 412 461 558, E-mail <mailto:hfinger at handholding.com.au> ------------------------------ _______________________________________________ You are currently subscribed to Framers. To unsubscribe send a blank email to http://lists.frameusers.com/mailman/listinfo/framers Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. End of Framers Digest, Vol 28, Issue 22 ***************************************