Hi Rick;
It's been a while, but I as I recall, the only way I found was to do a
S&R for these characters. That was back in FM7 or so, so things may
have changed.
Grant
On January 25, 2018 at 1:18 PM Rick Quatro wrote:
Hi Framers,
I have a structured FrameMaker 2017 document that has been
translated to Simplified Chinese. Some of the cross-reference
formats have double quotes in them, like
See “<$paratext>” on page <$pagenum>.
The text has been translated but the quotes and building blocks are
still there. The problem is that with the Chinese there are
sometimes line breaks after the open quote and before the close
quote, depending on where the cross-reference falls on the line. For
example, the close quote in the text below is on the second line by
itself instead of bring the whole quoted text down with it.
燃油加注口盖。请参见第 97 页的 “ 燃油加注
”
The same thing happens if an open quote falls as the end of the
line; it stays there and the rest of the quoted text moves to the
next line. Is there a way to prevent these line breaks? Thank you
very much.
Rick
Rick Quatro
Carmen Publishing Inc.
[1][email protected]
585-366-4017
_______________________________________________
This message is from the Framers mailing list
Send messages to [2][email protected]
Visit the list's homepage at [3]http://www.frameusers.com
Archives located at
[4]http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at
[5]http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to [6][email protected]
References
1. mailto:[email protected]
2. mailto:[email protected]
3. http://www.frameusers.com/
4. http://www.mail-archive.com/[email protected]/
5. http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
6. mailto:[email protected]
_______________________________________________
This message is from the Framers mailing list
Send messages to [email protected]
Visit the list's homepage at http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to [email protected]
