Mmh penetrating oil didn't work (I used Wd-40), I think I applied a considerable torque (don't ask me how much)... I wonder how much the service can charge for having the job done... thanks anyway Livio
2015-08-31 16:42 GMT+02:00 Ugo Bo <ugobodi...@gmail.com>: > Thanks Scott > I'm going to have a try tonight with some unlocking oil. > > But the cog screw that's is stuck is a male one, which goes in the rewind > spindle screw that's a female one, so heating the cog up should widen it > making it stuck even more... > > And I can't heat up the spindle screw which is unaccessible without > dismantling the camera... (and both of these things scare me a bit...) > > 2015-08-31 16:14 GMT+02:00 Scott Dorsey <klu...@panix.com>: > >> Put a drop of kroil or some other penetrating oil on the cog. Maybe >> heat it up a little with a soldering iron. >> --scott >> >> _______________________________________________ >> FrameWorks mailing list >> FrameWorks@jonasmekasfilms.com >> https://mailman-mail5.webfaction.com/listinfo/frameworks >> > >
_______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks