Hi Scott, I am not certain about that model, but on similar models there are several (usually 2-3) soldered in fuses. They are not easily accesses and require lifting the whole front panel and gearbox up out of the wooden shell. Then they are located in the center rear of the projector. I have replaced one of these to fix a problem with the main lamp, but without a wiring diagram it's hard to know for sure about the sound lamp circuit.
Perhaps this is helpful? -cb On Fri, Feb 24, 2017 at 4:55 PM, Scott Stark <sst...@hi-beam.net> wrote: > Hi Frameworkers, I have a Pageant AV 12 E6 where the optical sound bulb is > not coming on. I’ve replaced it with a new one and it’s still not working > (the old one didn’t look burned out either). I know the amplifier is > working as I hear a healthy hum when I turn it on, and the flash from my > camera even caused a loud pop when I snapped this photo, so I know the > reader sensor itself is working. Any idea what could be causing the bulb > not to come on? There’s a “circuit breaker” button on the panel but it > doesn’t seem to do anything when I press it. Is there a fuse somewhere > inside that might need replacement? > > > > http://www.hi-beam.net/temp/IMG_1633.JPG > > > > Thanks for any advice. > > > > Scott Stark > > scottstark.com <http://www.scottstark.com/> > > Experimental Response Cinema <http://www.ercatx.org/> > > Flicker <http://www.hi-beam.net/> > > > > _______________________________________________ > FrameWorks mailing list > FrameWorks@jonasmekasfilms.com > https://mailman-mail5.webfaction.com/listinfo/frameworks > >
_______________________________________________ FrameWorks mailing list FrameWorks@jonasmekasfilms.com https://mailman-mail5.webfaction.com/listinfo/frameworks