John Baldwin <j...@freebsd.org> writes: > On Thursday, June 13, 2013 10:00:21 am Ganael LAPLANCHE wrote: >> Hi, >> >> As you may know, suspend/resume has been broken on Lenovo x220 for a >> long time now, see : >> >> http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/174504 >> >> I have been able to do a suspend(S3)/resume operation in text mode (it >> works, but console stays dark at resume, I had to connect through ssh ; >> also, resume hangs if X is started with i915kms.ko loaded) and collect >> the following verbose logs : > > Interesting, I connected a serial console via AMT but wasn't able to get > any output during resume. Is this with a stock kernel?
Does the console via AMT otherwise work for you? I'm trying to set up AMT as the console on a TP X201. I got the serial over LAN working using amtterm from another machine - verified with cu on the tty (ttyu2) that typing on both ends shows up at the other end before trying console redirection. The device is: uart2: <Non-standard ns8250 class UART with FIFOs> port 0x1808-0x180f mem 0xf2524000-0xf2524fff irq 17 at device 22.3 on pci0 uart2@pci0:0:22:3: class=0x070002 card=0x216217aa chip=0x3b678086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset KT Controller' class = simple comms subclass = UART bar [10] = type I/O Port, range 32, base 0x1808, size 8, enabled bar [14] = type Memory, range 32, base 0xf2524000, size 4096, enabled cap 01[c8] = powerspec 3 supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 bit I've set: hint.uart.2.flags="0x10" console="comconsole" in /boot/loader.conf, but the loader just hangs after printing: Loading /boot/defaults/loader.conf Any advice? Is uart2 unusable as a console? It does not say "flags 0x10" in the device probe - does that mean it won't work? Bengt _______________________________________________ freebsd-acpi@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-acpi To unsubscribe, send any mail to "freebsd-acpi-unsubscr...@freebsd.org"