On Wednesday, June 25, 2014 3:48:07 pm Hilko Meyer wrote: > On Wed, 25 Jun 2014 10:17:31 -0400, John Baldwin wrote: > >It is for HEAD though it should apply to 9-stable. It might not apply to > >9.2 > >as it patches a previous fix that went to 9.2. For 9.2, please merge the > >change to stable/9 from > >http://svnweb.freebsd.org/base?view=revision&revision=263022 first and then > >apply this patch. > > Thanks for the patch. Works now. Diff to the verbose dmesg without your patch: > > -acpi_timer0: couldn't allocate resource (port 0x4008) > +ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 > +Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > +acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 > [...] > -pcib0: <ACPI Host-PCI bridge> port > 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0 > +pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > [...] > viapropm0: <VIA VT82C686A Power Management Unit> port 0x5000-0x500f at device > 7.4 on pci0 > -viapropm0: could not allocate bus space > -device_attach: viapropm0 attach returned 6 > +viapropm0: SMBus revision code 0x40 > +smbus0: <System Management Bus> on viapropm0 > +smb0: <SMBus generic I/O> on smbus0 > [...] > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > -acpi_throttle0: failed to attach P_CNT > -device_attach: acpi_throttle0 attach returned 6 > +acpi_throttle0: P_CNT from P_BLK 0x4010 > > I could start powerd again. > > Thanks for your help, > Hilko > > PS: Just for the record, output of dmesg and devinfo from the working system > with your patch: > devinfo -rv: http://pastebin.com/whga6mxc > devinfo -u: http://pastebin.com/xQLdCWTz > dmesg -v : http://pastebin.com/jtLmsJzs
Committed to HEAD. It won't make 9.3 release, but it should be in 10.1. Thanks for the report and for testing! -- John Baldwin _______________________________________________ freebsd-acpi@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-acpi To unsubscribe, send any mail to "freebsd-acpi-unsubscr...@freebsd.org"