Thanks again Maksims, my ppp connection is ok now. For whom it may concern: Here it is the /etc/ppp/ppp.conf to connect via bluetooth to Vodafone in Italy:
issue as an ordinary user: rfcomm_pppd -a <BD_ADDR> -c -C dun -l rfcomm-dialup >>>>>>>>>>>>>>>>>>>>>>>> rfcomm-dialup: enable force-scripts set phone *99\# enable dns disable mppe enable lqr # Attento a questa set dial "ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 \ \"\" ATZ OK-AT-OK ATE1Q0 OK \ AT+CGDCONT=1,\\\"IP\\\",\\\"web.omnitel.it\\\",\\\"0.0.0.0\\\" OK \ \\dATDT\\T TIMEOUT 40 CONNECT" set authname set authkey disable vjcomp disable deflate disable protocomp set dns 83.224.66.134 83.224.65.134 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alle 00:18, sabato 24 marzo 2007, Maksim Yevmenkin ha scritto: > On 3/23/07, ml-vic <[EMAIL PROTECTED]> wrote: > > For a very long time I've being using a umts pcmcia card so it was easy > > to me modify a bit ppp.conf file as below to connect my pc thru bluetooth > > and my cell phone used as modem: > > > > > > ################################################################# > > # PPP Sample Configuration File > > ################################################################# > > > > default: > > set log Phase Chat LCP IPCP CCP tun command > > ident user-ppp VERSION (built COMPILATIONDATE) > > > > rfcomm-dialup: > > set device /dev/ubt0 > > get rid of "set device", ppp is executed in -direct mode, i.e. > stdin/stdout is used instead of opening device. in fact, there is no > /dev/ubt0. does not seem to matter, but its confusing. > > > enable force-scripts > > set phone *99\# > > > > set mtu 300 > > set mru 300 > > i'd say loose those (mtu/mru) too. it seems like remote side does not like > it. > > otherwise looks fine to me > > max > > > enable dns > > disable mppe > > enable lqr > > > > set dial "ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 \ > > \"\" ATZ OK-AT-OK ATE1Q0 OK \ > > AT+CGDCONT=1,\\\"IP\\\",\\\"web.omnitel.it\\\",\\\"0.0.0.0\\\" OK \ > > \\dATDT\\T TIMEOUT 40 CONNECT" > > > > set authname # those can be usually chosen at will > > set authkey > > disable vjcomp > > disable deflate > > disable protocomp > > set dns 83.224.66.134 83.224.65.134 > > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > > add default HISADDR > > ################################## > > > > And then launch > > > > # rfcomm_pppd -a 00:12:d2:65:c2:03 -c -C dun -l rfcomm-dialup > > > > ppp starts, chats, tries to connect to the provider but drops after a > > while issuing a flood of LCP requests (see below ppp.log) > > > > Any idea? > > > > Ciao > > Vittorio _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-bluetooth To unsubscribe, send any mail to "[EMAIL PROTECTED]"
