https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=260868
--- Comment #12 from m...@sentex.net ---
Arggg, very sorry. My fault, I was not paying attention to !scp this AM as I
was sending the built image to the wrong location to burn the resultant image.
Anyways, I can confirm the boot looks good with your patch!
OK boot -v
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-STABLE #1 stable/13-682886d11-dirty: Sun Jan 2 15:52:05 EST 2022
mdtan...@nano13-i386.sentex.ca:/usr/obj/nanobsd.alix2b/usr/src/i386.i386/sys/alix
i386
FreeBSD clang version 13.0.0 (g...@github.com:llvm/llvm-project.git
llvmorg-13.0.0-0-gd7b669b3a303)
VT(vga): resolution 640x480
Preloaded elf kernel "/boot/kernel/kernel" at 0x132c000.
Preloaded elf module "/boot/kernel/u3g.ko" at 0x13348ac.
Preloaded boot_entropy_cache "/boot/entropy" at 0x1334cf4.
Preloaded TSLOG data "TSLOG" at 0x1334d40.
Early TSC frequency 498077420Hz calibrated from 8254 PIT
CPU: Geode(TM) Integrated Processor by AMD PCS (498.08-MHz 586-class CPU)
Origin="AuthenticAMD" Id=0x5a2 Family=0x5 Model=0xa Stepping=2
Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
AMD Features=0xc0400000<MMX+,3DNow!+,3DNow!>
L1 2MB data TLB: 0 entries, 0-way associative
L1 2MB instruction TLB: 0 entries, 0-way associative
L1 4KB data TLB: 16 entries, fully associative
L1 4KB instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 32 bytes/line, 1 lines/tag, 16-way associative
L1 instruction cache: 64 kbytes, 32 bytes/line, 1 lines/tag, 16-way associative
L2 2MB unified TLB: 4 entries, disabled/not present
L2 4KB unified TLB: 0 entries, disabled/not present
L2 unified cache: 128 kbytes, 32 bytes/line, 1 lines/tag, 4-way associative
Write Allocate Disable
real memory = 268435456 (256 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000007fffff, 7340032 bytes (1792 pages)
0x0000000001429000 - 0x000000000fbb4fff, 242794496 bytes (59276 pages)
avail memory = 249569280 (238 MB)
bios32: Found BIOS32 Service Directory header at 0x4fd110
bios32: Entry = 0xfd0e4 (4fd0e4) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xcf35
pnpbios: Bad PnP BIOS data checksum
Other BIOS signatures found:
random: read 4096 bytes from preloaded cache
random: unblocking device.
hostuuid: using 00000000-0000-0000-0000-000000000000
ULE: setup cpu 0
random: entropy device external interface
null: <full device, null device, zero device>
io: <I/O>
crypto: <crypto core>
kbd0 at kbdmux0
mem: <memory>
K6-family MTRR support enabled (2 registers)
vtvga0: <VT VGA driver>
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 1 [class=060000] [hdr=80] is there (id=20801022)
pcibios: BIOS version 2.10
pcib0 pcibus 0
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1022, dev=0x2080, revid=0x33
domain=0, bus=0, slot=1, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0220, cachelnsz=8 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0xac1c, size 2, enabled
found-> vendor=0x1022, dev=0x2082, revid=0x00
domain=0, bus=0, slot=1, func=2
class=10-10-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x02a0, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[10]: type Memory, range 32, base 0xefff4000, size 14, enabled
found-> vendor=0x1106, dev=0x3053, revid=0x96
domain=0, bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0097, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x1000, size 8, enabled
map[14]: type Memory, range 32, base 0xe0000000, size 8, enabled
found-> vendor=0x1106, dev=0x3053, revid=0x96
domain=0, bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0097, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x1400, size 8, enabled
map[14]: type Memory, range 32, base 0xe0040000, size 8, enabled
found-> vendor=0x1106, dev=0x3053, revid=0x96
domain=0, bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0097, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=15
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x1800, size 8, enabled
map[14]: type Memory, range 32, base 0xe0080000, size 8, enabled
found-> vendor=0x1022, dev=0x2090, revid=0x03
domain=0, bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0009, statreg=0x02a0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x6000, size 3, enabled
map[14]: type I/O Port, range 32, base 0x6100, size 8, enabled
map[18]: type I/O Port, range 32, base 0x6200, size 6, enabled
map[20]: type I/O Port, range 32, base 0x9d00, size 7, enabled
map[24]: type I/O Port, range 32, base 0x9c00, size 6, enabled
found-> vendor=0x1022, dev=0x209a, revid=0x01
domain=0, bus=0, slot=15, func=2
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02a0, cachelnsz=8 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled
found-> vendor=0x1022, dev=0x2094, revid=0x02
domain=0, bus=0, slot=15, func=4
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=12
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xefffe000, size 12, enabled
found-> vendor=0x1022, dev=0x2095, revid=0x02
domain=0, bus=0, slot=15, func=5
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=12
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xefffd000, size 12, enabled
Geode LX: PC Engines ALIX.2 v0.99m tinyBIOS V1.4a (C)1997-2007
MFGPT bar: f00100006200
pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver
attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1000-0x10ff mem
0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0
vr0: Quirks: 0x2
vr0: Revision: 0x96
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: OUI 0x0002c6, model 0x0034, rev. 3
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr0: bpf attached
vr0: Ethernet address: 00:0d:b9:36:c3:1c
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1400-0x14ff mem
0xe0040000-0xe00400ff irq 11 at device 10.0 on pci0
vr1: Quirks: 0x2
vr1: Revision: 0x96
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x0002c6, model 0x0034, rev. 3
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr1: bpf attached
vr1: Ethernet address: 00:0d:b9:36:c3:1d
vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1800-0x18ff mem
0xe0080000-0xe00800ff irq 15 at device 11.0 on pci0
vr2: Quirks: 0x2
vr2: Revision: 0x96
miibus2: <MII bus> on vr2
ukphy2: <Generic IEEE 802.3u media interface> PHY 1 on miibus2
ukphy2: OUI 0x0002c6, model 0x0034, rev. 3
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr2: bpf attached
vr2: Ethernet address: 00:0d:b9:36:c3:1e
isab0: <PCI-ISA bridge> port
0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at device
15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD CS5536 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 15.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xefffe000-0xefffefff irq 12 at
device 15.4 on pci0
usbus0 on ohci0
ohci0: usbpf: Attached
ehci0: <AMD CS5536 (Geode) USB 2.0 controller> mem 0xefffd000-0xefffdfff irq 12
at device 15.5 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ehci0: usbpf: Attached
cpu0
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0
sc0 failed to probe on isa0
vga0 failed to probe on isa0
atkbdc0 failed to probe at port 0x60 on isa0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
uart1: fast interrupt
uart1: PPS capture mode: DCD
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 498077420 Hz quality 800
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
stray irq7
crypto: <crypto device>
IPsec: Initialized Security Association Processing.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 2048
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
pflog0: bpf attached
ugen1.1: <AMD EHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <AMD OHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
Trying to mount root from ufs:/dev/ada0s1a [ro]...
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
Root mount waiting for: CAM usbus0 usbus1
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <CF 2GB 20110221> ATA-7 device
ada0: Serial Number TSS50037130117092408
ada0: 100.000MB/s transfers (UDMA5, PIO 512bytes)
ada0: 1919MB (3931200 512 byte sectors)
GEOM: new disk ada0
pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <CF 2GB 20110221> ATA-7 device
pass0: Serial Number TSS50037130117092408
pass0: 100.000MB/s transfers (UDMA5, PIO 512bytes)
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
uhub0: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
ugen1.2: <Sierra Wireless, Incorporated MC7700> at usbus1
u3g0 on uhub0
u3g0: <Sierra Wireless, Incorporated MC7700, class 0/0, rev 2.00/0.06, addr 2>
on usbus1
u3g0: port 3 supports modem control
u3g0: port 4 supports modem control
u3g0: port 5 supports modem control
u3g0: Found 6 ports.
mountroot: waiting for device /dev/ada0s1a...
atrtc0: providing initial system time
start_init: trying /sbin/init
Starting file system checks:
/dev/ada0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s1a: clean, 362308 free (1844 frags, 45058 blocks, 0.1% fragmentation)
/dev/ada0s3: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s3: clean, 2829 free (21 frags, 351 blocks, 0.7% fragmentation)
/etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating
a new one
Setting hostuuid: b9fd83f3-6c0e-11ec-8cdb-000db936c31c.
Setting hostid: 0xd68a03f8.
Mounting local filesystems:.
Setting hostname: kernpatch2.sentex.ca.
Setting up harvesting:
[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: dd: /boot/entropy: Read-only file system
.
ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/lib/ipsec
/usr/local/lib/perl5/5.32/mach/CORE
/etc/rc: WARNING: $swapfile is obsolete. Ignored.
lo0: link state changed to UP
vr0: link state changed to DOWN
vr1: link state changed to DOWN
vr2: link state changed to DOWN
Starting Network: lo0 vr0 vr1 vr2.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
groups: lo
ndvr0: link state changed to UP
6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
ether 00:0d:b9:36:c3:1c
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
vr1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
ether 00:0d:b9:36:c3:1d
inet 192.168.241.129 netmask 0xffffff00 broadcast 192.168.241.255
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
vr2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
ether 00:0d:b9:36:c3:1e
inet 192.168.1.51 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting dhclient.
DHCPDISCOVER on vr0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on vr0 to 255.255.255.255 port 67 interval 13
DHCPOFFER from 192.168.0.12
DHCPREQUEST on vr0 to 255.255.255.255 port 67
DHCPACK from 192.168.0.12
arp: 00:0d:b9:20:f6:b4 is using my IP address 192.168.254.2 on vr0!
bound to 192.168.0.90 -- renewal in 1800 seconds.
Starting pflog.
pflog0: promiscuous mode enabled
add host 127.0.0.1: gateway lo0 fib 0: route already in table
2022-01-02T15:58:42.765039-05:00 kernpatch2.sentex.ca pflogd 556 - - [priv]:
msg PRIV_OPEN_LOG received
Additional inet routing options: gateway=YES.
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Enabling pf.
Clearing /tmp (X related).
Creating and/or trimming log files.
Updating /var/run/os-release done.
Updating motd:.
Starting syslogd.
Mounting late filesystems:.
Starting inetd.
Configuring vt: blanktime.
Starting sendmail_submit.
Starting sendmail_msp_queue.
Starting cron.
Sun Jan 2 15:59:08 EST 2022
FreeBSD/i386 (kernpatch2.sentex.ca) (ttyu0)
login:
0(kernpatch2)# sysctl -a kern.timecounter
kern.timecounter.tsc_shift: 1
kern.timecounter.invariant_tsc: 0
kern.timecounter.fast_gettime: 1
kern.timecounter.tick: 1
kern.timecounter.choice: TSC(800) i8254(0) dummy(-1000000)
kern.timecounter.hardware: TSC
kern.timecounter.alloweddeviation: 5
kern.timecounter.timehands_count: 2
kern.timecounter.stepwarnings: 0
kern.timecounter.tc.TSC.quality: 800
kern.timecounter.tc.TSC.frequency: 498077420
kern.timecounter.tc.TSC.counter: 168552419
kern.timecounter.tc.TSC.mask: 4294967295
kern.timecounter.tc.i8254.quality: 0
kern.timecounter.tc.i8254.frequency: 1193182
kern.timecounter.tc.i8254.counter: 47506
kern.timecounter.tc.i8254.mask: 65535
0(kernpatch2)#
--
You are receiving this mail because:
You are the assignee for the bug.
