On Fri, 26 Nov 1999, Soren Schmidt wrote:
<>It seems F. Heinrichmeyer wrote:
<>> more observations to the zip-drive problem:
<>> First the relevant dmesg-line:
I'm also still having a small problem with the ata driver and my HP
Colorado 8G. I have it hanging off an ATAPI CDROM as a slave.
The dmesg says:
ata-pci1: <AcerLabs Aladdin IDE controller> irq 0 at device 11.0 on pci0
ata-pci1: Busmastering DMA supported
ata0: iobase=0x01f0 altiobase=0x03f6
ata0: mask=03 status0=00 status1=00
ata0: mask=03 status0=00 status1=00
ata0: devices = 0xc
ata0 at 0x01f0 irq 14 on ata-pci1
This indicates that it sees two ATAPI devices. But when the system
starts up, all I get is:
ata0-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
atapi: MODE_SENSE_BIG - UNIT ATTENTION skey=6 asc=29 ascq=00 error=00
acd0: <DELTA OPC-K101/ST1 F/W by OIPD/VER-3.40> CDROM drive at ata0 as master
acd0: read 687KB/s (6875KB/s), 128KB buffer, PIO
acd0: supported read types: CD-R, CD-RW, CD-DA, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
No tape drive is found. All worked well with the old drivers.
==========================================================
= Bryan D. Liesner LeezSoft Communications, Inc. =
= A subsidiary of LeezSoft Inc. =
= [EMAIL PROTECTED] Home of the Gipper =
==========================================================
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
