On Tue, 21 Dec 1999, Andrey A. Chernov wrote:
> With latest ppp I hear no phone numbers dial sounds at the stage:
> Phase: Phone: NNNNNNNNN
> ppp does _nothing_ until timeout occurse, then redial happens
> with the same unsuccessful result.
I'm seeing the exact same thing. It appears that the phone number
substition is broken in the dial string. It work for me, if I replace \\T
with the number I want to dial.
Once I got it working, something else I saw that I thought was odd, maybe
due to the mbuf changes in ppp, is when doing a cvsup of a large file, I
get the log messages below and then ppp dies. Specifically it was choking
on one of the uuencided compat libs just committed.
-- Begin Log Messages --
Dec 20 20:15:35 ender ppp[5719]: tun0: Error: Request for mbuf size
2872 denied
Dec 20 20:15:35 ender ppp[5719]: tun0: Phase: PPP Terminated (71).
Dec 20 20:15:35 ender ppp[5719]: tun0: IPCP: deflink: LayerDown:
204.179.134.192
Dec 20 20:15:35 ender ppp[5719]: tun0: IPCP: Using trigger address 0.0.0.0
Dec 20 20:15:35 ender ppp[5719]: tun0: IPCP: deflink: SendTerminateReq(3)
state = Opened
Dec 20 20:15:35 ender ppp[5719]: tun0: IPCP: deflink: State change Opened
--> Closing
Dec 20 20:15:35 ender ppp[5719]: tun0: Error: Oops, destroying a datalink
in state open
Dec 20 20:15:35 ender ppp[5719]: tun0: Phase: deflink: Connect time: 604
secs: 724617 octets in, 1007191 octets out
Dec 20 20:15:35 ender ppp[5719]: tun0: Phase: total 2867 bytes/sec, peak
6971 bytes/sec on Mon Dec 20 20:15:35 1999
-- End Log Messages --
My currently working config is below:
default:
#
# Make sure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device /dev/cuaa1
set log Phase Chat LCP IPCP CCP tun command
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATZ OK-ATZ-OK \
ATE1Q0 OK ATDT\\T TIMEOUT 40 CONNECT"
set timeout 120
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
enable dns
ricochet:
set device /dev/cuaa0
set speed 57600
set parity even
set ctsrts on
set phone 777
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATZ OK-ATZ-OK \
ATE1Q0 OK ATDT777 TIMEOUT 40 CONNECT"
set timeout 0
delete! default
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
delete ALL
add 0 0 HISADDR
Here is my previously working config:
default:
#
# Make sure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device /dev/cuaa1
set log Phase Chat LCP IPCP CCP tun command
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATZ OK-ATZ-OK \
ATE1Q0 OK ATDT\\T TIMEOUT 40 CONNECT"
set timeout 120
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
enable dns
ricochet:
set device /dev/cuaa0
set speed 57600
set parity even
set ctsrts on
set phone 777
set timeout 0
delete! default
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
delete ALL
add 0 0 HISADDR
--
Christopher Nielsen
(enkhyl|cnielsen)@pobox.com
Enkhyl on IRC
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message