Peter Wemm wrote:
> Try changing the 'device pcm0 at .....' to this:
>
> options PNPBIOS
> device pcm0
>
> with *no* 'at isa?'. See what happens. If it shows up in the pnp id tags but
> isn't recognized, show us the 'unknown*' lines from dmesg.
Tried that. The config and dmesg output follows. (It didn't work.)
(Irrelevant bits deleted.)
options PNPBIOS
device pcm0
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #1: Tue Jan 11 19:14:54 PST 2000
[EMAIL PROTECTED]:/usr/local/src/sys/compile/AUTON
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Celeron (397.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
sio0: gdb debugging port
avail memory = 126783488 (123812K bytes)
Preloaded elf kernel "kernel" at 0xc0312000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <NeoMagic MagicMedia 256AV SVGA controller> mem
0xfec00000-0xfecfffff,0xfe800000-0xfebfffff,0xfd000000-0xfdffffff at device 0.0 on pci1
pcm0: this is a non-ac97 NM256AV, not attaching
chip1: <NeoMagic MagicMedia 256AX Audio controller> mem
0xfe700000-0xfe7fffff,0xfe000000-0xfe3fffff irq 11 at device 0.1 on pci1
pcic-pci0: <TI PCI-1220 PCI-CardBus Bridge> at device 4.0 on pci0
pcic-pci1: <TI PCI-1220 PCI-CardBus Bridge> at device 4.1 on pci0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 11 at device
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x2180-0x218f irq 9 at device
7.3 on pci0
intpm0: I/O mapped 2180
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 8000
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <4 virtual consoles, flags=0x200>
pcic: polling, can't alloc 0
pcic: polling, can't alloc 0
pcic0: <VLSI 82C146> on isa0
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A
ppc0 at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
unknown0: <PNP0c02> at port 0x80,0x401-0x407 iomem 0xfff80000-0xffffffff on isa0
unknown1: <PNP0200> at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
unknown: <PNP0000> can't assign resources
unknown2: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown3: <PNP0b00> at port 0x70-0x71,0x72-0x73 irq 8 on isa0
unknown4: <PNP0c01> at iomem 0-0x9ffff,0xdc000-0xfffff,0x100000-0x7ffffff on isa0
unknown: <PNP0303> can't assign resources
unknown5: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown: <PNP0800> can't assign resources
unknown6: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown: <PNP0c02> can't assign resources
unknown7: <PNP0c02> on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0401> can't assign resources
unknown8: <NMX2210> at port 0x220-0x22f,0x530-0x537,0x388-0x38f,0x320-0x321 irq 5 drq
0,1 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
ad0: <FUJITSU MHH2048AT/B819> ATA-4 disk at ata0 as master
ad0: 4645MB (9514260 sectors), 10068 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
acd0: <TOSHIBA CD-ROM XM-1902B/1A14> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, WDMA2
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-RW 120mm data disc loaded, unlocked
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
pccard: card inserted, slot 1
sio1 at port 0x2f8-0x2ff irq 3 slot 0 on pccard0
sio1: type 16550A
ep0: No irq?!
--
Frank Mayhar [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
