> In message <[EMAIL PROTECTED]> Brian Somers writes:
> : Since the PnP probing code was made unconditional in the bootup
> : routines on December 6, I've been having problems with my
> : Adaptec 1542CP.
> :
> : I've got my BIOS set to ``non pnp OS'' and my 1542 set to 0x330.
> : I've never had ``options pnp0'' in my config, and on December 6 (when
> : isa/pnp.c and isa/pnpprobe.c started being included with isa devices
> : rather than with ``options pnp*'', the card stopped being probed.
> :
> : If I skip the code in pnp_identify() in isa/pnp.c, everything works
> : fine.
> :
> : Are there any plans to re-optionify this code ?
> :
> : I can provide more details once I rebuild my machine.... See my
> : other post about some ata problems, coming to a -current list near
> : you !
>
> So you have your 1542CP hardware set to be hardwired at 0x330 and not
> in PnP mode? Is that correct? If so, then why is it responding to
> the PnP probes. It shouldn't be.
I've no idea, but this is what's happening. Just before the boot:
prompt, the BIOS confirms that the card is taking on 0x330/irq11/drq7.
> Warner
--
Brian <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
<http://www.Awfulhak.org> <[EMAIL PROTECTED]>
Don't _EVER_ lose your sense of humour ! <[EMAIL PROTECTED]>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
