I seem to have all the hardware required for querying the temperature probes in the system (At least I can do it from the BIOS).
How can I query this info ? I assume I need "controller smbus0" and "controller intpm0" in my kernel. But do I also need "device smb0 at smbus?" and/or any of the following: # ic i2c network interface # iic i2c standard io # iicsmb i2c to smb bridge. Allow i2c i/o with smb commands. Once I have all this stuff in my kernel, what commands do I use to query the probes ?? My system is FreeBSD 4.0-CURRENT (of CTM 3722 - but will soon be really -CURRENT) Extract from dmesg: chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0 chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0 chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0 ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 chip3: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3 -- Matthew Thyer Phone: +61 8 8259 7249 Corporate Information Systems Fax: +61 8 8259 5537 Defence Science and Technology Organisation, Salisbury PO Box 1500 Salisbury South Australia 5108 To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-current" in the body of the message