Around Today, "Doug Rabson" wrote : DR> Its harmless and it should go away soon if we can reorganise syscons' vga DR> driver slightly.
I'm seeing this as well, but as you've said, it's harmless. What I am "concerned" about is from sources last night, the error haveseen_isadev() called - FIXME! after the isa0 bus has been probed, and something I haven't seen before : (cd1:aha0:0:6:0): CCB 0xc51952e0 - timed out indicating a problem with my Yamaha CD-RW. Is this something serious ? As an aside, I'm trying Soren's ATA code, and it combined with the new-bus changes (neither of which I was using before) has made a dramatic difference speed-wise (or maybe it's just a placebo effect). Nice work :) Dmesg below. Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #0: Tue Apr 20 13:00:36 SAST 1999 khe...@chain.freebsd.os.org.za:/usr/src/sys/compile/CHAIN Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 200455994 Hz CPU: Pentium/P54C (200.46-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 100663296 (98304K bytes) avail memory = 94699520 (92480K bytes) Preloaded elf kernel "kernel" at 0xc02d9000. ccd0-1: Concatenated disk drivers Probing for PnP devices: npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <PCI host bus adapter> on motherboard pci0: <PCI bus> on pcib0 chip0: <Host to PCI bridge (vendor=1039 device=5591)> at device 0.0 on pci0 ata0: <Unknown PCI IDE controller> at device 0.1 on pci0 ata-pci0: Busmastering DMA supported ata0 at 0x01f0 irq 14 on ata-pci0 ata1 at 0x0170 irq 15 on ata-pci0 isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0 pcib1: <PCI to PCI bridge (vendor=1039 device=0001)> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 de0: <Digital 21041 Ethernet> at device 11.0 on pci0 de0: interrupting at irq 5 de0: SMC 21041 [10Mb/s] pass 1.1 de0: address 00:00:c0:f9:2f:c8 isa0: <ISA bus> on motherboard haveseen_isadev() called - FIXME! aha0 at port 0x330-0x333 irq 11 drq 6 on isa0 aha0: AHA-1542CF FW Rev. C.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 CCBs aha0: interrupting at irq 11 atkbdc0: <keyboard controller (i8042)> at port 0x60 on isa0 atkbd0: <AT Keyboard> on atkbdc0 atkbd0: interrupting at irq 1 psm0: <PS/2 Mouse> on atkbdc0 psm0: model IntelliMouse, device ID 3 psm0: interrupting at irq 12 vga0: <Generic ISA VGA> on isa0 sc0: <System console> on isa0 sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio0: interrupting at irq 4 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio1: interrupting at irq 3 ppc0 at port 0x378 irq 7 on isa0 ppc0: Winbond chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus 0 lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 ppc0: interrupting at irq 7 de0: enabling 10baseT port Intel Pentium detected, installing workaround for F00F bug ata0: master: settting up generic WDMA2 mode OK ad0: <WDC AC21000H/21.15T71> ATA-? disk at ata0 as master ad0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S ad0: piomode=4, dmamode=2, udmamode=-1 ad0: 16 secs/int, 0 depth queue, DMA mode ata0: slave: settting up generic WDMA2 mode OK ad1: <QUANTUM FIREBALL1080A/A1M.0900> ATA-? disk at ata0 as slave ad1: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S ad1: piomode=4, dmamode=2, udmamode=-1 ad1: 8 secs/int, 0 depth queue, DMA mode ata1: master: settting up generic WDMA2 mode OK ad2: <ST32140A/07.07.01> ATA-? disk at ata1 as master ad2: 2015MB (4127760 sectors), 4095 cyls, 16 heads, 63 S/T, 512 B/S ad2: piomode=4, dmamode=2, udmamode=-1 ad2: 16 secs/int, 0 depth queue, DMA mode Waiting 15 seconds for SCSI devices to settle changing root device to wd1s1a da0 at aha0 bus 0 target 2 lun 0 da0: <QUANTUM LPS540S 5900> Fixed Direct Access SCSI-2 device aha0: ahafetchtransinfo - Inquire Setup Info Failed da0: 3.300MB/s transfers da0: 516MB (1057616 512 byte sectors: 64H 32S/T 516C) da1 at aha0 bus 0 target 4 lun 0 da1: <CONNER CFA540S 14B1> Fixed Direct Access SCSI-2 device da1: 3.300MB/s transfers da1: 515MB (1056708 512 byte sectors: 64H 32S/T 515C) cd0 at aha0 bus 0 target 5 lun 0 cd0: <NEC CD-ROM DRIVE:502 2.0r> Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: cd present [325725 x 2048 byte records] (cd1:aha0:0:6:0): CCB 0xc51952e0 - timed out (cd1:aha0:0:6:0): CCB 0xc51952e0 - timed out aha0: No longer in timeout cd1 at aha0 bus 0 target 6 lun 0 cd1: <YAMAHA CRW4260 1.0q> Removable CD-ROM SCSI-2 device cd1: 3.300MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-current" in the body of the message