This morning, I did an installworld and booted a new -current world and -current kernel (Sources from morning of Fri May 14th). I got the following messages during the SCSI probe:
Waiting 10 seconds for SCSI devices to settle aha0: ahafetchtransinfo - Inquire Setup Info Failed (probe20:aha0:0:5:0): CCB 0xc553b450 - timed out (probe20:aha0:0:5:0): CCB 0xc553b450 - timed out aha0: No longer in timeout I'm not sure what to make of this. After a bit of a delay - 30 or so seconds, I don't quite recall how long - the system continued booting, normally the rest of the way, and seems to be functional. Do I need to update something for normal behavior? I've been following freebsd-current and cvs-all, though I might have missed something that would have clued me in. Here are my controllers: ahc0: <Adaptec 274X SCSI host adapter> at slot 4 on eisa0 ahc0: aic7770 >= Rev E, Wide Channel A, SCSI Id=7, 4/255 SCBs aha0 at ports 0x130-0x133 and 0x131-0x134 irq 11 drq 7 on isa0 aha0: AHA-1542C FW Rev. 0.1 (ID=44) SCSI Host Adapter, SCSI ID 7, 16 CCBs Here is my disk information: da3 at ahc0 bus 0 target 4 lun 0 da3: <CONNER CFP1060W 1.05GB 2035> Fixed Direct Access SCSI-2 device da3: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da3: 1013MB (2074880 512 byte sectors: 64H 32S/T 1013C) da1 at ahc0 bus 0 target 3 lun 0 da1: <SEAGATE ST410800N 7110> Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 15) da1: 8347MB (17096357 512 byte sectors: 255H 63S/T 1064C) da4 at ahc0 bus 0 target 5 lun 0 da4: <CONNER CFP1060W 1.05GB 2035> Fixed Direct Access SCSI-2 device da4: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da4: 1013MB (2074880 512 byte sectors: 64H 32S/T 1013C) da5 at ahc0 bus 0 target 6 lun 0 da5: <CONNER CFP1060W 1.05GB 2035> Fixed Direct Access SCSI-2 device da5: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da5: 1013MB (2074880 512 byte sectors: 64H 32S/T 1013C) cda0 at aha0 bus 0 target 0 lun 0 da0: <FUJITSU M2624F-512 0405> Fixed Direct Access SCSI-2 device da0: 3.333MB/s transfers (3.333MHz, offset 8) da0: 496MB (1015812 512 byte sectors: 64H 32S/T 496C) cd0 at aha0 bus 0 target 5 lun 0 cd0: <TOSHIBA CD-ROM XM-3401TA 0283> Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: cd present [261564 x 2048 byte records] da2 at aha0 bus 0 target 2 lun 0 da2: <HP C2257 0BC4> Fixed Direct Access SCSI-2 device da2: 3.300MB/s transfers da2: 1910MB (3912172 512 byte sectors: 64H 32S/T 1910C) hanging root device to da0s1a cd9660: Joliet Extension To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-current" in the body of the message