Hi yongari!
I have a OpenRD Ultimate, which has two GbE ports - if_mge(4). But
I couldn't use mge1 like following. So I tried to investigate.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
Jun 13 05:02:14 sidearms kernel: mge1: watchdog timeout
Jun 13 05:02:14 sidearms kernel: mge1: Timeout on link-up
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
I found a initialize issue in e1000phy.c.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
--- sys/dev/mii/e1000phy.c.orig 2010-05-01 10:17:15.282196000 +0900
+++ sys/dev/mii/e1000phy.c 2010-06-13 16:19:46.616650536 +0900
@@ -278,6 +278,7 @@
case MII_MODEL_MARVELL_E1118:
break;
case MII_MODEL_MARVELL_E1116:
+ case MII_MODEL_MARVELL_E1149:
page = PHY_READ(sc, E1000_EADR);
/* Select page 3, LED control register. */
PHY_WRITE(sc, E1000_EADR, 3);
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
I confirmed OK on my environment, OpenRD Ultimate has a 88E1121(I
saw it, physically):
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
Jun 13 15:20:01 sidearms kernel: miibus0: miibus_probe: ma.mii_id1 = 0x141,
ma.mii_id2 = 0xcb3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
And I confirmed that MII chipset ID is same as 88E1249.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
mge0
Marvell OBIO Memory:
4043776000-4043784191
Marvell OBIO IRQ:
11
12
13
14
46
miibus0
e1000phy0 pnpinfo oui=0x5043 model=0xb rev=0x3 at phyno=0
mge1
Marvell OBIO Memory:
4043792384-4043800575
Marvell OBIO IRQ:
15
16
17
18
47
miibus1
e1000phy1 pnpinfo oui=0x5043 model=0xb rev=0x3 at phyno=1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
BTW, I knew same issue on OpenRD Client, it has a 88E1116R, maybe.
Sorry, I don't already have it. I couldn't confirm.
So accordingly my memo:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
miibus0: ma.mii_id1 = 0x141, ma.mii_id2 = 0xe40
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
I found many initialize issues on 88E1116R by not existing on
e1000phy.c. Maybe 88E1116 = 88E1116R like following:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
switch (esc->mii_model) {
case MII_MODEL_MARVELL_E1111:
case MII_MODEL_MARVELL_E1112:
case MII_MODEL_MARVELL_E1116:
+ case MII_MODEL_MARVELL_E1116R:
case MII_MODEL_MARVELL_E1118:
case MII_MODEL_MARVELL_E1149:
case MII_MODEL_MARVELL_PHYG65G:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - -
But there are many points, I don't know that this modify is right.
--
Hayabusa, Okaerinasai!
Norikatsu Shigemura <n...@freebsd.org>
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
