Just wanted to share some things/small problems I've noticed on my box
w/ 4.0-CURRENT and find out if these were bugs or problems w/ my stuff.
4.0 has been working great for me otherwise.
I'm having sound problems w/ my AudioPCI card && pcm. The first sound
played thru the card generally sounds alright, but subsequent sounds
have their beginnings clipped/chopped. Short audio files sometimes
produce no audible output.
'cdcontrol stop' doesn't stop the cd. 'cdcontrol status' after a stop
command shows "Audio status = 18<paused>". This doesn't seem to affect
playback w/ cdcontrol, but GUI cdplayers act confused sometimes.
Kernel option VESA fails (see dmesg below). Is this a problem with my
graphics card?
Kernel option PNPBIOS causes the mouse to stop working. A pointer is
visible at boot (w/ moused) until the mouse is moved, then it disappears
forever. Maybe I'm misunderstanding what PNPBIOS does....
I've had 1 crash already. I believe I was running 2 'rm -rf's and a find
on large directory trees at the same time. Didn't get a dump
unfortunately. Seem to remember this being a known problem w/ 3.x, is
this still the case w/ 4.0?
'halt -p' still doesn't turn my computer off :). Haven't tested any other
functionality of apm though. I usually disable apm in the bios since
it makes turning the system power off w/ the button on the case a problem
under FreeBSD. Any ideas?
/usr/games/phantasia doesn't like the return key. You have to use
<cntl>-<j> (w/ TERMs xterm and cons25). /usr/games/teachgammon doesn't
always clear the screen of previous text completely.
None of these are showstoppers. Just thought I should mention them.
dmesg and kernel config follow.
--Joe
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Thu Feb 24 11:20:39 EST 2000
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/JOE
Timecounter "i8254" frequency 1193612 Hz
CPU: Pentium/P55C (200.53-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 167706624 (163776K bytes)
avail memory = 159141888 (155412K bytes)
Preloaded elf kernel "kernel" at 0xc032e000.
Intel Pentium detected, installing workaround for F00F bug
module_register_init: MOD_LOAD (vesa, c0239368, 0) error 6
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Intel PIIX4 ATA controller> at 7.1
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 10
intpm0: <Intel 82371AB Power management controller> port 0xff40-0xff4f irq 9 at device
7.3 on pci0
intpm0: I/O mapped ff40
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped ff00
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xee80-0xeebf irq 11 at device 17.0 on pci0
xl0: Ethernet address: 00:60:08:39:89:3f
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <Number Nine model 493d graphics accelerator> at 18.0 irq 11
pcm0: <AudioPCI ES1370> port 0xef00-0xef3f irq 11 at device 19.0 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xffeef000-0xffeeffff
irq 10 at device 20.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
pca0 at port 0x40 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown0: <TelePath for Windows with x2> at port 0x110-0x117 irq 3 on isa0
IPsec: Initialized Security Association Processing.
IP Filter: initialized. Default = pass all, Logging = enabled
IP Filter: v3.3.8
Waiting 2 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <HP HP35480A 1009> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34573W 6244> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST32155W 0362> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <SEAGATE ST32155W 0596> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C)
Mounting root from ufs:/dev/da1a
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <PLEXTOR CD-ROM PX-12TS 1.02> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [329478 x 2048 byte records]
#
#
#
machine i386
cpu I586_CPU # aka Pentium(tm)
ident JOE
maxusers 32
options INCLUDE_CONFIG_FILE # Include this file in kernel
options CPU_FASTER_5X86_FPU
options COMPAT_43
options USER_LDT #allow user-level control of i386 ldt
options SYSVSHM
options SYSVSEM
options SYSVMSG
options MD5
options KTRACE #kernel tracing
options DIAGNOSTIC
options PERFMON
options UCONSOLE
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
#####################################################################
# NETWORKING OPTIONS
options INET #Internet communications protocols
#options INET6 #IPv6 communications protocols
options IPSEC #IP security
options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
#options IPSEC_IPV6FWD #IP security tunnel for IPv6
options NETGRAPH #netgraph(4) system
pseudo-device ether #Generic Ethernet
pseudo-device loop #Network loopback device
pseudo-device bpf #Berkeley packet filter
pseudo-device tun #Tunnel driver (ppp(8), nos-tun(8))
pseudo-device ppp 1 #Point-to-point protocol
options PPP_BSDCOMP #PPP BSD-compress support
options PPP_DEFLATE #PPP zlib/deflate/gzip support
options PPP_FILTER #enable bpf filtering (needs bpf)
# for IPv6
#pseudo-device gif 1 #IPv6 and IPv4 tunneling
#pseudo-device faith 1 #for IPv6 and IPv4 translation
options IPFILTER #ipfilter support
options IPFILTER_LOG #ipfilter logging
options IPSTEALTH #support for stealth forwarding
#options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
#options TCP_RESTRICT_RST #restrict emission of TCP RST
#options ICMP_BANDLIM
#####################################################################
# FILESYSTEM OPTIONS
options FFS #Fast filesystem
options MFS #Memory File System
#options NFS_NOSERVER #Disable the NFS-server code.
options CD9660 #ISO 9660 filesystem
options MSDOSFS #MS DOS File System
options PROCFS #Process filesystem
options CD9660_ROOT #CD-ROM usable as root device
options FFS_ROOT #FFS usable as root device
options MD_ROOT
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
#####################################################################
# SCSI DEVICES
device scbus #base SCSI code
device da #SCSI direct access devices (aka disks)
device sa #SCSI tapes
device cd #SCSI CD-ROMs
device pass #CAM passthrough driver
device pt #SCSI processor type
#device ses #SCSI SES/SAF-TE driver
#####################################################################
# MISCELLANEOUS DEVICES AND OPTIONS
pseudo-device pty #Pseudo ttys
pseudo-device speaker #Play IBM BASIC-style noises out your speaker
pseudo-device gzip #Exec gzipped a.out's
pseudo-device md #Memory/malloc disk
pseudo-device snp 1 #Snoop device - to look at pty/vty/etc..
options MSGBUF_SIZE=40960
#####################################################################
# HARDWARE DEVICE CONFIGURATION
device isa
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
options VESA
pseudo-device splash
device sc0 at isa?
#options SC_DISABLE_DDBKEY # disable `debug' key
#options SC_DISABLE_REBOOT # disable reboot key sequence
options SC_HISTORY_SIZE=200 # number of history buffer lines
options SC_PIXEL_MODE # add support for the raster text mode
# The following options will let you change the default colors of syscons.
#options SC_NORM_ATTR="(FG_GREEN|BG_BLACK)"
#options SC_NORM_REV_ATTR="(FG_YELLOW|BG_GREEN)"
options SC_KERNEL_CONS_ATTR="(FG_YELLOW|BG_BLUE)"
options SC_KERNEL_CONS_REV_ATTR="(FG_WHITE|BG_RED)"
device npx0 at nexus? port IO_NPX flags 0x0 irq 13
#device ata
#device atadisk # ATA disk drives
#device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device pcm
device pca0 at isa? port IO_TIMER1
device apm0
#device joy0 at isa? port IO_GAME
#
# PCI devices & PCI options:
device pci
device ahc # AHA2940 and onboard AIC7xxx devices
device miibus
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#
# SMB bus
device smbus # Bus support, required for smb below.
device intpm
device smb
device iicbus # Bus support, required for ic/iic/iicsmb below.
device iicbb
device ic
device iic
device iicsmb # smb over i2c bridge
#
# Parallel-Port Bus
options PPC_PROBE_CHIPSET # Enable chipset specific detection
# (see flags in ppc(4))
device ppc0 at isa? irq 7
device ppbus
device lpt
# More undocumented options
options CLK_CALIBRATION_LOOP
options CLK_USE_I8254_CALIBRATION
options CLK_USE_TSC_CALIBRATION
#options COMPAT_LINUX
options I586_PMC_GUPROF=0x70000
#options PNPBIOS
options SHOW_BUSYBUFS # List buffers that prevent root unmount
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
