On Wed, Mar 08, 2000 at 08:45:34PM +0100, Morten Seeberg wrote:
> Hi, I just installed RC3, and I have the same problem as on RC2, when I run
> "zzz" my machine turns off the monitor, stops the disk, etc etc. Actually is
> does everything itīs supposed to, except go to stand-by mode (give the beep
> and turn off).
>
> So when i press any key, the machine wakes up again?? Is this a know
> problem?
>
> All I did was to add apm_enable="YES" to rc.conf and remove the diskable in
> the KERNEL line, my dmesg looks like this:
I have the exact same problem on my Thinkpad 600E, earlier I tracked it
down to a change in the below interval.
Only my wakes up without me touching anything ...
*default date=2000.01.13.23.00.00 ok
*default date=2000.01.15.23.00.00 cannot build
*default date=2000.01.15.03.00.00 cannot build
*default date=2000.01.14.12.00.00 cannot build
*default date=2000.01.14.06.00.00 cannot build
*default date=2000.01.16.18.00.00 cannot build
*default date=2000.01.17.02.00.00 cannot build
*default date=2000.01.17.23.00.00 cannot build
*default date=2000.01.17.13.00.00 cannot build
*default date=2000.01.14.03.00.00 cannot build
*default date=2000.01.16.08.00.00 cannot build
*default date=2000.01.18.22.00.00 builds - no suspend
Is there any debug'ing we can enable, that will be enable us to track
down what 'awakens it' ?
/Jesper
--
Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456
Work: Network manager @ AS3292 (Tele Danmark DataNetworks)
Private: Geek @ AS2109 (A much smaller network ;-)
One Unix to rule them all, One Resolver to find them,
One IP to bring them all and in the zone to bind them.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message