I think these errors caused by devices created for legacy ISA
compatibility via device hints. Go to device.hints and remove all ATA
stuff from there to force ATA to be detected only via PCI.
Another problem I see here with module load order. Loading atapci before
ataadm will make generic driver attach to controller, not specific one.
Unluckily loading in different order won't help, I think, because ataamd
depends on atapci and will load it automatically.
Hi,
we have commented these lines in device.hints:
#hint.ata.0.at="isa"
#hint.ata.0.port="0x1F0"
#hint.ata.0.irq="14"
#hint.ata.1.at="isa"
#hint.ata.1.port="0x170"
#hint.ata.1.irq="15"
and now there are no errors in dmesg,
but:
1. ataamd doesn't load automatically atapci.ko, so I kept the order.
2. after loading modules and
# atacontrol detach ata0
# atacontrol attach ata0
I can't still see my CF connected to net5501.
Is it possible to load dynamically modules or do they have to be compiled in
kernel... ?
--
Marek Salwerowicz
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"