It seems Hans Ottevanger wrote:
> Hi folks,
>
> I just tried to boot the RC3 install floppies on my Pentium 66 testbox.
> It gets through the config stage without trouble, but then panics
> immediately with:
>
> ...
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> atapci0: <RZ 100? ATA controller !WARNING! buggy chip data loss
> possible> port 0
> x3f4-0x3f7,0x1f0-0x1f7 at device 1.0 on pci0
> atapci0: Busmastering DMA not supported
> panic: resource_list_alloc: resource entry is busy
>
> I am also having this problem with 4.0-CURRENT kernels since February
> 18, both with my own custom kernel config and GENERIC.
> I have to revert to the ata driver of February 17 or earlier to get the
> system booting again, and then it runs perfectly.
Hmm, seems to be a resource conflict problem, question is what is
causing this. Could you do a verbose boot both with the old
working kernel, and the new failing one ?
> This machine has an Intel motherboard with a Mercury chipset, 64 Mbyte
> RAM, Matrox Millenium II, two Western Digital disks, and it ran all
> previous FreeBSD releases perfectly for almost five years.
Yeah I notice the RZ 1000 chips in there, BE CAREFULL, I wouldn't
use this for anything I cared about...
-Søren
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
