On Mon, Aug 13, 2012 at 11:30:06PM +0200, Pierre DAVID wrote: > On Sun, Aug 12, 2012 at 05:49:24PM +0200, Paul Schenkeveld wrote: > > Hi, > > > > I am trying to build a NanoBSD image for Soekris net4801 with a recent > > -CURRENT. The kernel boots fine but when it comes to mounting the root > > filesystem, it cannot find the flash disk anymore. Bios is up to date > > (1.33). > > > > Hello, > > I'm trying to resurrect my old net4801 and update it with -CURRENT > (old version was a 8-CURRENT), and I do not succeed to get kernel > output via the RS-232 port. Kernel goes mute just after being loaded. > Could you send me your NanoBSD kernel configuration file? > > Pierre
Below is my kernel config. You also have to use boot0sio and create a file called /boot.config containing "-h" so the boot loader knows that you want to use a serial console. Usually NanoBSD does that for you if you include "customize_cmd cust_comconsole" in your NanoBSD config file and leave NANO_BOOTLOADER set to its default of "boot/boot0sio". ------------------------------------------------------------------------ # from GENERIC cpu I586_CPU ident NET4801 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options INCLUDE_CONFIG_FILE # Include this file in kernel device apic # I/O APIC device cpufreq device acpi device pci device ahci # AHCI-compatible SATA controllers device ata # Legacy ATA/SATA controllers options ATA_CAM # Handle legacy controllers with CAM options ATA_STATIC_ID # Static device numbering device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) device ctl # CAM Target Layer device pmtimer device uart # Generic UART driver device miibus # MII bus support device sis # Silicon Integrated Systems SiS 900/SiS 7016 device loop # Network loopback device random # Entropy device device ether # Ethernet support device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device bpf # Berkeley packet filter options USB_DEBUG # enable debug msgs device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da # local additions makeoptions MODULES_OVERRIDE="" options CPU_GEODE options CPU_SOEKRIS device atadisk # ATA disk drives ------------------------------------------------------------------------ I have tried with and without the "device atadisk" line but my compact flash is never seen by the kernel. Kind regards, Paul Schenkeveld _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
