19.11.2012 13:19, Volodymyr Kostyrko пишет: > 19.11.2012 10:59, Volodymyr Kostyrko wrote: >> 19.11.2012 10:24, Alex Keda wrote: >>> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 >>> ada0: <WDC WD1600BEVT-00A0RT0 01.01A01> ATA-8 SATA 2.x device >>> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >>> ada0: Command Queueing enabled >>> ada0: 152627MB (312581809 512 byte sectors: 16H 63S/T 16383C) >>> ada0: Previously was known as ad4 >> >> Looking for this one? ATA_CAM was made default for now. > > Damn I'm sorry. Looks like I need my coffee back... > > The change actually is at: > > > ahci0: <ATI IXP600 AHCI SATA controller> port > 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f > mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0 > > ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported > > and > > > ahci0: <ATI IXP600 AHCI SATA controller> port > 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f > mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0 > > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 > > ahci0: AHCI v0.00 with 1 ?Gbps ports, Port Multiplier not supported > with FBS > > ahci0: Caps: ?Gbps FBS 2cmd 1ports > > The bad thing about that is that there was no major rewrite of ahci > code in this timeframe. There are some point that can be checked though: > > 1. What is your BIOS settings for controller? Can you try switching it > between Legacy/Compatible mode? There was a change that fixed behavior > for detecting different BIOS settings. BIOS does not have SATA controller settings
_______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
