Hi, Just leave all of the ath/ah options in the kernel.
Then comment out device ath device ath_hal device ath_rate_sample .. but yes, leave all the options in there. Adrian On 27 December 2012 12:06, <hu...@hush.com> wrote: > Hello, > > I hope you had a pleasant trip. Sorry for not replying for a while. > > Anyway, I tried to do what you asked me to. However, it seems like I > misunderstood the handbook and/or your request, as I failed to compile the > kernel. > > I copied my previous, working kernel config to a new file, and commented the > devices ath, ath_pci, ath_hal and ath_rate_sample, as well as the options > AH_SUPPORT_AR5416, AH_DEBUG and ATH_DEBUG. I did this because I could not > find instructions in the handbook that explained how to build a module as a > kld, and commenting the modules out was my best guess. Please point me to the > relevant section in the handbook in the case that the information was > actually there and I just was unable to find it. > The full kernel config can be seen here: http://nopaste.info/d7475552bd.html > Finally, I went to /usr/src and entered > make buildkernel KERNCONF=PAVILIONNOATH > > This is what I suspect is the relevant output: > > cc -O2 -pipe -fno-strict-aliasing -Werror -D_KERNEL -DKLD_MODULE -nostdinc > -I. -I/usr/src/sys/modules/ath/../../dev/ath > -I/usr/src/sys/modules/ath/../../dev/ath/ath_hal -DHAVE_KERNEL_OPTION_HEADERS > -include /usr/obj/usr/src/sys/PAVILIONNOATH/opt_global.h -I. -I@ > -I@/contrib/altq -finline-limit=8000 --param inline-unit-growth=100 --param > large-function-growth=1000 -fno-common -g -fno-omit-frame-pointer > -I/usr/obj/usr/src/sys/PAVILIONNOATH -mno-sse -mcmodel=kernel -mno-red-zone > -mno-mmx -msoft-float -fno-asynchronous-unwind-tables -ffreestanding > -fstack-protector -std=iso9899:1999 -fstack-protector -Wall -Wredundant-decls > -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith > -Winline -Wcast-qual -Wundef -Wno-pointer-sign -fformat-extensions > -Wmissing-include-dirs -fdiagnostics-show-option -c > /usr/src/sys/modules/ath/../../dev/ath/ath_hal/ah.c > In file included from /usr/src/sys/modules/ath/../../dev/ath/ath_hal/ah.c:55: > @/net/if_var.h:125: error: 'IFNAMSIZ' undeclared here (not in a function) > @/net/if_var.h:151: error: field 'if_data' has incomplete type > cc1: warnings being treated as errors > @/net/if_var.h:157: warning: 'struct sockaddr' declared inside parameter list > @/net/if_var.h:157: warning: its scope is only this definition or > declaration, which is probably not what you want > @/net/if_var.h:167: warning: 'struct sockaddr' declared inside parameter list > @/net/if_var.h:187: error: 'AF_MAX' undeclared here (not in a function) > @/net/if_var.h:718: error: field 'if_data' has incomplete type > /usr/src/sys/modules/ath/../../dev/ath/ath_hal/ah.c: In function > 'ath_hal_attach': > /usr/src/sys/modules/ath/../../dev/ath/ath_hal/ah.c:65: warning: > dereferencing 'void *' pointer > /usr/src/sys/modules/ath/../../dev/ath/ath_hal/ah.c:65: error: request for > member 'sc_ifp' in something not a structure or union > /usr/src/sys/modules/ath/../../dev/ath/ath_hal/ah.c:70: warning: > dereferencing 'void *' pointer > /usr/src/sys/modules/ath/../../dev/ath/ath_hal/ah.c:70: error: request for > member 'sc_ifp' in something not a structure or union > *** Error code 1 > > The full output has been posted to http://nopaste.info/408e62ac0f.html > > I'm willing and hoping to help troubleshoot this issue, but please keep in > mind that I'm new to FreeBSD, so please give detailed instructions whenever > you can. > > Thank you very much! > >> >>Hi, >> >>Ok. I'm travelling for a little bit; if I don't reply in a few >>days, >>please poke me again. >> >>It may be that the device is asleep for a bit longer (failing this >>test) and has completed resetting at this point. >> >>It may be that the power on sequence is not quite right for some >>reason. >> >>Would you mind recompiling your kernel and making if_ath a kld, >>rather >>than statically in the kernel? >> >>Thanks, >> >> >>Adrian >> >>> >>> attached to this e-mail you find the output of dmesg. What I >>guess the most relevant lines could be is: >>> >>> ath0: <Atheros 5413> mem 0xfdee0000-0xfdeeffff irq 16 at device >>4.0 on pci2 >>> ar5212ChipTest: address test failed addr: 0x00008000 - >>wr:0x00000000 != rd:0xffffffff >>> ar5212Attach: hardware self-test failed >>> ath0: unable to attach hardware; HAL status 14 >>> device_attach: ath0 attach returned 6 >>> >>> I read the registers 4004 and 4010 again to make sure the values >>still are the same, which indeed they are. >>> >>> I hope this helps. >>> >>> Thanks! >>> >>> On Donnerstag, 13. Dezember 2012 at 10:18 PM, "Adrian Chadd" >><adr...@freebsd.org> wrote: >>>> >>>>On 13 December 2012 13:11, <hu...@hush.com> wrote: >>>>> Hello everyone, >>>>> >>>>> I'm afraid I still don't know what exactly BAR is, or how I get >>>>its value that I'm supposed to plug into the line John provided: >>>>> dd if=/dev/mem bs=4 iseek=((start of bar + reg offset)/4) >>>>count=1 | hd >>>>> >>>>> I assumed that "start of bar" is 0xfdee0000 in my case, since >>>>dmesg reports >>>>> ath0: <Atheros 5413> mem 0xfdee0000-0xfdeeffff irq 16 at device >>>>4.0 on pci2 >>>> >>>>Yup. >>>> >>>>> This is what I get: >>>>> # dd if=/dev/mem bs=4 iseek=`echo "ibase=16; (FDEE0000+4004)/4" >>>>| bc` count=1 | hd >>>>> 00 00 01 00 >>>>> # dd if=/dev/mem bs=4 iseek=`echo "ibase=16; (FDEE0000+4010)/4" >>>>| bc` count=1 | hd >>>>> 14 00 01 00 >>>>> >>>>> Please correct me if my assumption about "start of bar" was >>>>wrong and/or I made some other mistake. >>>>> Also, please don't hesitate to ask me to do anything else that >>>>might help you during debugging. >>>>> >>>>> Thank you very much for the effort. >>>> >>>>Hm. Wait, what's the rest of the ath0: output? >>>> >>>> >>>> >>>>Adrian > _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
