Are you really using the latest FREEBSD_5.0_CURRENT ?
I have just
device pcm
in my kernel config (without PNPBIOS) and the SBLive
works fine (many thanks to Cameron for his nice driver).
Make sure that the line
dev/sound/pci/emu10k1.c optional pcm pci
is not commented (in /usr/src/sys/conf/files)
norbert
Kent Hauser wrote:
>
> Hi all,
>
> I can't for the life of me get my new gateway computer
> to make any noise (at least with FreeBSD). I've tried
> all the PNP/nonPNP combinations from LINT (and then some).
>
> The card is a "Creative Labs Soundblaster Live!" PCI card.
> The gateway blurb is found on:
>
> http://www.gateway.com/mes/default.asp?page=soundcards
>
> The sound config lines & dmesg output are attached. Any
> pointers would be greatly appreciated.
>
> Thanks a bunch.
> Kent
>
> =========
> options PNPBIOS
> device pcm
> device sbc
> device csa
> device pca0 at isa? port IO_TIMER1
> =========
>
> Copyright (c) 1992-2000 The FreeBSD Project.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-CURRENT #0: Wed Apr 5 19:14:25 EDT 2000
> [EMAIL PROTECTED]:/usr/src/sys/compile/GW
> Calibrating clock(s) ... TSC clock: 696358058 Hz, i8254 clock: 1193099 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz
> CLK_USE_TSC_CALIBRATION not specified - using old calibration method
> CPU: Pentium III/Pentium III Xeon (696.41-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x681 Stepping = 1
>
>Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
> real memory = 134217728 (131072K bytes)
> Physical memory chunk(s):
> 0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
> 0x00462000 - 0x040fcfff, 63549440 bytes (15515 pages)
> 0x04100000 - 0x07ff7fff, 66027520 bytes (16120 pages)
> avail memory = 126103552 (123148K bytes)
> bios32: Found BIOS32 Service Directory header at 0xc00f6a90
> bios32: Entry = 0xfd780 (c00fd780) Rev = 0 Len = 1
> pcibios: PCI BIOS entry at 0x203
> pnpbios: Found PnP BIOS data at 0xc00f6ae0
> pnpbios: Entry = f0000:9e33 Rev = 1.0
> Other BIOS signatures found:
> ACPI: 000f6ac0
> Preloaded elf kernel "kernel" at 0xc0449000.
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> Creating DISK md0
> Math emulator present
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
> pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
> found-> vendor=0x8086, dev=0x7190, revid=0x03
> class=06-00-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> map[10]: type 1, range 32, base f8000000, size 26, enabled
> found-> vendor=0x8086, dev=0x7191, revid=0x03
> class=06-04-00, hdrtype=0x01, mfdev=0
> subordinatebus=1 secondarybus=1
> found-> vendor=0x8086, dev=0x7110, revid=0x02
> class=06-01-00, hdrtype=0x00, mfdev=1
> subordinatebus=0 secondarybus=0
> found-> vendor=0x8086, dev=0x7111, revid=0x01
> class=01-01-80, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> map[20]: type 1, range 32, base 00001400, size 4, enabled
> found-> vendor=0x8086, dev=0x7112, revid=0x01
> class=0c-03-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=d, irq=9
> map[20]: type 1, range 32, base 000010c0, size 5, enabled
> found-> vendor=0x8086, dev=0x7113, revid=0x02
> class=06-80-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> map[90]: type 1, range 32, base 00007000, size 4, enabled
> found-> vendor=0x14f1, dev=0x1036, revid=0x08
> class=07-80-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=a, irq=5
> map[10]: type 1, range 32, base f4000000, size 16, enabled
> map[14]: type 1, range 32, base 00001410, size 3, enabled
> found-> vendor=0x1102, dev=0x0002, revid=0x07
> class=04-01-00, hdrtype=0x00, mfdev=1
> subordinatebus=0 secondarybus=0
> intpin=a, irq=11
> map[10]: type 1, range 32, base 000010e0, size 5, enabled
> found-> vendor=0x1102, dev=0x7002, revid=0x07
> class=09-80-00, hdrtype=0x00, mfdev=1
> subordinatebus=0 secondarybus=0
> map[10]: type 3, range 32, base 00001418, size 3, enabled
> found-> vendor=0x105a, dev=0x4d38, revid=0x01
> class=01-80-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=a, irq=10
> map[10]: type 1, range 32, base 00001430, size 3, enabled
> map[14]: type 1, range 32, base 00001424, size 2, enabled
> map[18]: type 3, range 32, base 00001428, size 3, enabled
> map[1c]: type 1, range 32, base 00001420, size 2, enabled
> map[20]: type 1, range 32, base 00001080, size 6, enabled
> map[24]: type 1, range 32, base f4020000, size 17, enabled
> found-> vendor=0x10b7, dev=0x9006, revid=0x04
> class=02-00-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=a, irq=9
> map[10]: type 1, range 32, base 00001000, size 7, enabled
> map[14]: type 1, range 32, base f4010000, size 7, enabled
> found-> vendor=0x12b9, dev=0x1008, revid=0x01
> class=07-00-02, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=a, irq=5
> map[10]: type 3, range 32, base 00001438, size 3, enabled
> pci0: <PCI bus> on pcib0
> pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
> found-> vendor=0x10de, dev=0x0028, revid=0x15
> class=03-00-00, hdrtype=0x00, mfdev=0
> subordinatebus=0 secondarybus=0
> intpin=a, irq=11
> map[10]: type 1, range 32, base f5000000, size 24, enabled
> map[14]: type 1, range 32, base fc000000, size 25, enabled
> pci1: <PCI bus> on pcib1
> pci1: <NVidia Riva TNT2 graphics accelerator> (vendor=0x10de, dev=0x0028) at 0.0 irq
>11
> isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 ATA33 controller> port 0x1400-0x140f at device 7.1 on pci0
> ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1400
> ata0: mask=00 status0=ff status1=ff
> ata0: probe allocation failed
> ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1408
> ata1: mask=03 status0=50 status1=50
> ata1: mask=03 status0=00 status1=10
> ata1: devices = 0xc
> ata1: at 0x170 irq 15 on atapci0
> pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2
>irq 9
> chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at device 7.3
>on pci0
> pci0: <unknown card> (vendor=0x14f1, dev=0x1036) at 13.0 irq 5
> pci0: <unknown card> (vendor=0x1102, dev=0x0002) at 14.0 irq 11
> pci0: <unknown card> (vendor=0x1102, dev=0x7002) at 14.1
> atapci1: <Promise ATA66 controller> port
>0x1080-0x10bf,0x1420-0x1423,0x1428-0x142f,0x1424-0x1427,0x1430-0x1437 mem
>0xf4020000-0xf403ffff irq 10 at device 15.0 on pci0
> ata-: ata2 exists, using next available unit number
> ata2: iobase=0x1430 altiobase=0x1424 bmaddr=0x1080
> ata2: mask=03 status0=50 status1=00
> ata2: mask=03 status0=50 status1=00
> ata2: devices = 0x1
> ata2: at 0x1430 on atapci1
> ata3: iobase=0x1428 altiobase=0x1420 bmaddr=0x1088
> ata3: mask=03 status0=00 status1=00
> ata3: mask=03 status0=00 status1=00
> ata3: devices = 0x0
> ata3: probe allocation failed
> xl0: <3Com 3c900B-TPC Etherlink XL> port 0x1000-0x107f mem 0xf4010000-0xf401007f irq
>9 at device 16.0 on pci0
> xl0: Ethernet address: 00:50:da:17:a0:3a
> xl0: media options word: 18
> xl0: guessing TPC (BNC/TP)
> xl0: found 10baseT
> xl0: found BNC
> xl0: selecting 10baseT transceiver, half duplex
> xl0: supplying EUI64: 00:50:da:ff:fe:17:a0:3a
> bpf: xl0 attached
> sio0: irq maps: 0x3 0x23 0x3 0x3
> sio0: <3COM PCI FaxModem> port 0x1438-0x143f irq 5 at device 17.0 on pci0
> sio0: moving to sio4
> sio4: type 16550A
> pnpbios: 17 devices, largest 317 bytes
> PNP0c02: adding io range 0x370-0x371, size=0x2, align=0x1
> PNP0c02: adding io range 0xea-0xeb, size=0x2, align=0x1
> PNP0c02: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000
> PNP0c02: end config
> pnpbios: handle 0 device ID PNP0c02 (020cd041)
> PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
> PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000
> PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
> PNP0c01: adding fixed memory32 range 0xfff80000-0xfffbffff, size=0x40000
> PNP0c01: end config
> pnpbios: handle 1 device ID PNP0c01 (010cd041)
> PNP0200: adding io range 0-0xf, size=0x10, align=0x1
> PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
> PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
> PNP0200: adding dma mask 0x10
> PNP0200: end config
> pnpbios: handle 2 device ID PNP0200 (0002d041)
> PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
> PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
> PNP0000: adding irq mask 00x4
> PNP0000: end config
> pnpbios: handle 3 device ID PNP0000 (0000d041)
> PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
> PNP0100: adding irq mask 00x1
> PNP0100: end config
> pnpbios: handle 4 device ID PNP0100 (0001d041)
> PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
> PNP0b00: adding irq mask 0x100
> PNP0b00: end config
> pnpbios: handle 5 device ID PNP0b00 (000bd041)
> PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
> PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
> PNP0303: adding irq mask 00x2
> PNP0303: end config
> pnpbios: handle 6 device ID PNP0303 (0303d041)
> PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
> PNP0c04: adding irq mask 0x2000
> PNP0c04: end config
> pnpbios: handle 7 device ID PNP0c04 (040cd041)
> PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
> PNP0800: end config
> pnpbios: handle 8 device ID PNP0800 (0008d041)
> PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
> PNP0a03: end config
> pnpbios: handle 9 device ID PNP0a03 (030ad041)
> PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
> PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
> PNP0c02: adding io range 0x7000-0x700f, size=0x10, align=0x1
> PNP0c02: end config
> pnpbios: handle 10 device ID PNP0c02 (020cd041)
> PNP0c02: adding fixed memory32 range 0xcb000-0xcbfff, size=0x1000
> PNP0c02: end config
> pnpbios: handle 12 device ID PNP0c02 (020cd041)
> PNP0f13: adding irq mask 0x1000
> PNP0f13: end config
> pnpbios: handle 13 device ID PNP0f13 (130fd041)
> PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
> PNP0501: adding irq mask 0x10
> PNP0501: end config
> pnpbios: handle 14 device ID PNP0501 (0105d041)
> PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
> PNP0501: adding irq mask 00x8
> PNP0501: end config
> pnpbios: handle 15 device ID PNP0501 (0105d041)
> PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
> PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
> PNP0700: adding irq mask 0x40
> PNP0700: adding dma mask 0x4
> PNP0700: end config
> pnpbios: handle 17 device ID PNP0700 (0007d041)
> PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
> PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x8
> PNP0401: adding irq mask 0x80
> PNP0401: adding dma mask 0x8
> PNP0401: end config
> pnpbios: handle 20 device ID PNP0401 (0104d041)
> Trying Read_Port at 203
> Trying Read_Port at 243
> Trying Read_Port at 283
> Trying Read_Port at 2c3
> Trying Read_Port at 303
> Trying Read_Port at 343
> Trying Read_Port at 383
> Trying Read_Port at 3c3
> ata-: ata0 exists, using next available unit number
> ata-: ata1 exists, using next available unit number
> ex_isa_identify()
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ata4: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
> ata4: mask=00 status0=ff status1=ff
> ata4: probe allocation failed
> bt0: Failed Status Reg Test - ff
> bt_isa_probe: Probe failed at 0x330
> bt0: Failed Status Reg Test - ff
> bt_isa_probe: Probe failed at 0x334
> bt0: Failed Status Reg Test - ff
> bt_isa_probe: Probe failed at 0x230
> bt0: Failed Status Reg Test - ff
> bt_isa_probe: Probe failed at 0x234
> bt0: Failed Status Reg Test - ff
> bt_isa_probe: Probe failed at 0x130
> bt0: Failed Status Reg Test - ff
> bt_isa_probe: Probe failed at 0x134
> aha0: status reg test failed ff
> aha0: status reg test failed ff
> aha0: status reg test failed ff
> aha0: status reg test failed ff
> aha0: status reg test failed ff
> aha0: status reg test failed ff
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbdc: RESET_KBD return code:00fa
> kbdc: RESET_KBD status:00aa
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> psm0: current command byte:0047
> kbdc: TEST_AUX_PORT status:0000
> kbdc: RESET_AUX return code:00fa
> kbdc: RESET_AUX status:00aa
> kbdc: RESET_AUX ID:0000
> psm: status 00 02 64
> psm: status 00 00 64
> psm: status 00 03 64
> psm: status 00 03 64
> psm: data 08 06 00
> psm: data 08 01 00
> psm: status 00 02 64
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3-00, 3 buttons
> psm0: config:00000000, flags:00000000, packet size:4
> psm0: syncmask:08, syncbits:08
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> fb0: vga0, vga, type:VGA (5), flags:0x7007f
> fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
> fb0: init mode:24, bios mode:3, current mode:24
> fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
> VGA parameters upon power-up
> 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0e 0f 00 00 07 30 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> VGA parameters in BIOS for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> EGA/VGA parameters to be used for mode 24
> 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
> bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
> b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
> 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
> sc0: <System console> on isa0
> sc0: VGA <16 virtual consoles, flags=0x200>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> pcic1: not probed (disabled)
> sio0: irq maps: 0x41 0x51 0x41 0x41
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: irq maps: 0x41 0x49 0x41 0x41
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> ppc0: parallel port found at 0x378
> ppc0: ECP SPP ECP+EPP SPP
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppi0: <Parallel I/O> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> plip0: <PLIP network interface> on ppbus0
> bpf: lp0 attached
> isa_compat: didn't get irq for le
> pca0 at port 0x40 on isa0
> isa_probe_children: probing PnP devices
> unknown0: <PNP0c02> at port 0x370-0x371,0xea-0xeb iomem 0xfffc0000-0xffffffff on isa0
> unknown1: <PNP0c01> at iomem
>0-0x9ffff,0xe4000-0xfffff,0x100000-0x7ffffff,0xfff80000-0xfffbffff on isa0
> unknown2: <PNP0200> at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
> unknown: <PNP0000> can't assign resources
> unknown3: <PNP0100> at port 0x40-0x43 irq 0 on isa0
> unknown4: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
> unknown: <PNP0303> can't assign resources
> unknown5: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
> pca1: <AT-style speaker sound> at port 0x61 on isa0
> unknown6: <PNP0a03> at port 0xcf8-0xcff on isa0
> unknown7: <PNP0c02> at port 0x4d0-0x4d1,0x8000-0x803f,0x7000-0x700f on isa0
> unknown8: <PNP0c02> at iomem 0xcb000-0xcbfff on isa0
> unknown: <PNP0f13> can't assign resources
> unknown: <PNP0501> can't assign resources
> unknown: <PNP0501> can't assign resources
> unknown: <PNP0700> can't assign resources
> unknown: <PNP0401> can't assign resources
> BIOS Geometries:
> 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
> 0 accounted for
> Device configuration finished.
> new masks: bio 40088440, tty 400310ba, net 400712ba
> bpf: sl0 attached
> bpf: ppp0 attached
> new masks: bio 40088440, tty 400310ba, net 400712ba
> bpf: lo0 attached
> bpf: gif0 attached
> bpf: gif1 attached
> bpf: gif2 attached
> bpf: gif3 attached
> bpf: stf0 attached
> bpf: faith0 attached
> IPsec: Initialized Security Association Processing.
> ata2-master: success setting up UDMA4 mode on Promise chip
> ad4: <IBM-DPTA-372730/P78GA30A> ATA-4 disk at ata2 as master
> ad4: 26105MB (53464320 sectors), 53040 cyls, 16 heads, 63 S/T, 512 B/S
> ad4: 16 secs/int, 32 depth queue, UDMA66
> ad4: piomode=4 dmamode=2 udmamode=4 cblid=1
> Creating DISK ad4
> Creating DISK wd4
> ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
> ata1-master: success setting up PIO4 mode on generic chip
> acd0: <Pioneer DVD-ROM ATAPIModel DVD-114 0117/E1.17> DVD-ROM drive at ata1 as master
> acd0: read 2750KB/s (6875KB/s), 512KB buffer, PIO4
> acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray
> acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
> ata1-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
> ata1-slave: success setting up PIO4 mode on generic chip
> acd1: <R/RW 4x4x24/1.08> CD-RW drive at ata1 as slave
> acd1: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 2048KB buffer, PIO4
> acd1: Reads: CD-R, CD-RW, CD-DA stream, packet
> acd1: Writes: CD-R, CD-RW, test write
> acd1: Audio: play, 2 volume levels
> acd1: Mechanism: ejectable tray
> acd1: Medium: no/blank disc inside, unlocked
> Mounting root from ufs:/dev/ad4s2a
> ad4s1: type 0xb, start 63, end = 16048934, size 16048872 : OK
> ad4s2: type 0xa5, start 16048935, end = 53464319, size 37415385 : OK
> start_init: trying /sbin/init
> xl0: starting DAD for fe80:0001::0250:daff:fe17:a03a
> bpf: tun0 attached
> xl0: DAD complete for fe80:0001::0250:daff:fe17:a03a - no duplicates found
> Linux-ELF exec handler installed
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-current" in the body of the message
--
email: [EMAIL PROTECTED]
web: http://gul.sourceforge.net
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
