>What does it say before this info?
In dmesg.boot (after `boot -v' at the loader prompt):
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 15 at device
7.2 on pci0
uhci0: LegSup = 0x00000010
uhci_run: setting run=0
uhci_run: done cmd=0x80 sts=0x20
uhci_run: setting run=1
uhci_run: done cmd=0x81 sts=0x0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Both uhci and usb drivers are statically linked to the kernel.
When I connected a USB keyboard, I got the messages in my previous
mail below.
>Shared interrupt?
No shared interrupt. Both IDE channels are disabled by BIOS, thus,
irq 15 is free. After all, The USB drivers work if I run a UP kernel
on the same machine.
>USB does work on SMP (or at least in some cases).
I know. It works on my another SMP box running 4.0-STABLE ;-<
Kazu
>> uhci_timeout: ii=0xc0a601c0
>> uhci_timeout: ii=0xc0a601c0
>> uhci_timeout: ii=0xc0a601c0
>> usbd_new_device: addr=2, getting first desc failed
>> uhub_explore: usb_new_device failed, error=TIMEOUT
>> uhub0: device problem, disabling port 1
>>
>> I vaguely remember someone also reported similar problems with the SMP
>> kernel in the past....
>>
>> Interesting thing is that I have another SMP box, and its USB works fine.
>> The version is 4.0-STABLE. The USB controller is VIA 83c572.
>>
>> Kazu
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
