On 16.09.2014 22:18, Milan Obuch wrote: > On Tue, 16 Sep 2014 21:55:50 +0200 > Maciej Milewski <m...@dat.pl> wrote: > >> On 16.09.2014 16:52, Milan Obuch wrote: >>> On Tue, 16 Sep 2014 09:40:45 +0200 >>> Nick Hibma <n...@van-laarhoven.org> wrote: >>> >>>> Hi, >>>> >>>> Is there someone who is able to test support for the Huawei E3272 >>>> card with CURRENT after 269584? I have not been able to confirm >>>> that it works. >>>> >>>> Thanks in advance. >>>> >>>> Nick >>>> >>> Hi, >>> >>> I did fresh svn update, rebuilt world+kernel, but it does not work >>> for me... > [ snip ] > >>> I tried attach/detach device beore and after loading u3g (just in >>> case...) and if_cdce kernel modules, but I saw no changes. >>> >>> From 'usbconfig dump_device_desc': >>> >>> ugen1.3: <HUAWEI Mobile HUAWEI Technology> at usbus1, cfg=0 md=HOST >>> spd=HIGH (480Mbps) pwr=ON (500mA) >>> >>> bLength = 0x0012 >>> bDescriptorType = 0x0001 >>> bcdUSB = 0x0200 >>> bDeviceClass = 0x0000 >>> bDeviceSubClass = 0x0000 >>> bDeviceProtocol = 0x0000 >>> bMaxPacketSize0 = 0x0040 >>> idVendor = 0x12d1 >>> idProduct = 0x1f01 >>> bcdDevice = 0x0102 >>> iManufacturer = 0x0002 <HUAWEI Technology> >>> iProduct = 0x0001 <HUAWEI Mobile> >>> iSerialNumber = 0x0004 <FFFFFFFFFFFFFFFF> >>> bNumConfigurations = 0x0001 >>> >>> If anything else is important, let me know. >>> >>> Regards, >>> Milan >> Try ejecting first this cd2 drive by cdcontrol eject or camcontrol >> eject. I had such scenario with other usb device and that helped. >> > Nothing. > > # camcontrol eject cd2 > Unit stopped successfully, Media ejected > > That's all. No new device created, neither in /dev directory nor in > ifconfig listing. Nothing in console log. > > From 'usbconfig dump_all_config_desc': > > ugen1.3: <HUAWEI Mobile HUAWEI Technology> at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=ON (500mA) > > Configuration index 0 > > bLength = 0x0009 > bDescriptorType = 0x0002 > wTotalLength = 0x0020 > bNumInterfaces = 0x0001 > bConfigurationValue = 0x0001 > iConfiguration = 0x0003 <Huawei Configuration> > bmAttributes = 0x0080 > bMaxPower = 0x00fa > > Interface 0 > bLength = 0x0009 > bDescriptorType = 0x0004 > bInterfaceNumber = 0x0000 > bAlternateSetting = 0x0000 > bNumEndpoints = 0x0002 > bInterfaceClass = 0x0008 > bInterfaceSubClass = 0x0006 > bInterfaceProtocol = 0x0050 > iInterface = 0x0000 <no string> > > Endpoint 0 > bLength = 0x0007 > bDescriptorType = 0x0005 > bEndpointAddress = 0x0001 <OUT> > bmAttributes = 0x0002 <BULK> > wMaxPacketSize = 0x0200 > bInterval = 0x0000 > bRefresh = 0x0000 > bSynchAddress = 0x0000 > > Endpoint 1 > bLength = 0x0007 > bDescriptorType = 0x0005 > bEndpointAddress = 0x0081 <IN> > bmAttributes = 0x0002 <BULK> > wMaxPacketSize = 0x0200 > bInterval = 0x0000 > bRefresh = 0x0000 > bSynchAddress = 0x0000 > > Regards, > Milan Your device has different idProduct than this added in patch. It might be caused by different configuration of the device/different provider who sells devices. I know that some devices might show up as HiLink mode(cdce) or serial mode(u3g). And this might be changed by flashing different firmware or sometimes by using usb_modeswitch(under linux not sure if it works under freebsd). Example is here: https://forum.pfsense.org/index.php?topic=48780.20;wap2
-- Pozdrawiam, Maciej Milewski _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
