On 04/01/15 16:27, Damian Weber wrote:
Try adding some quirks:
usbconfig dump_quirk_names | grep MSC
--HPS
Dear Hans Petter and Kurt, thank you for your great advice,
I successfully attached my Verbatim USB drive
the magic lines are
in ./dev/usb/usbdevs :
+vendor VERBATIM 0x18a5 Verbatim
+product VERBATIM STORENGO 0x0243 Verbatim Store N Go
in ./dev/usb/quirk/usb_quirk.c
/* copied from SANDISK, SDCZ2_128 */
+ USB_QUIRK(VERBATIM, STORENGO, 0x0000, 0xffff, UQ_MSC_FORCE_WIRE_BBB,
+ UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_IGNORE_RESIDUE,
+ UQ_MSC_NO_SYNC_CACHE),
result:
a) can mount it (mount_msdosfs)
b) can read/write files (sha1-checksums verified)
two questions remain
1) can the dmesg error messages be dealt with? ILLEGAL REQUEST asc:20,0
ugen2.2: <Verbatim> at usbus2
umass0: <Verbatim STORE N GO, class 0/0, rev 2.10/1.00, addr 2> on usbus2
umass0: SCSI over Bulk-Only; quirks = 0x4080
umass0:4:0: Attached to scbus4
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid
command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Verbatim STORE N GO > Removable Direct Access SPC-4 SCSI device
da0: 40.000MB/s transfers
da0: 14909MB (30535401 512 byte sectors: 255H 63S/T 1900C)
da0: quirks=0x2<NO_6_BYTE>
2) is it possible to modify usb_quirk.c without
going through the whole make-kernel dance?
Hi,
If usb_quirk is built like a module you only rebuild that and load.
Can you put this quirk and patch in a PR and assign to me and I'll get
it in!
--HPS
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
