> Please be sure that you build and install libstand before building
> a loader! (or use buildworld, that should work)
Good job tracking this one down Peter!!!!
Nate
>
> FICL is now active on the Alpha, and actually seems to work. The Alpha
> problems have been solved - it was an alignment issue of the end of code.
> Adding/removing code would make it fault.
>
> I am not sure if the x86 loader will be affected by a mismatch, but I would
> not like to bet on it. Be safe and make sure it is not linked against
> a stale libstand. :-)
>
> Cheers,
> -Peter
>
> ------- Forwarded Message
>
> Date: Fri, 12 May 2000 15:45:16 -0700
> From: Peter Wemm <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED], [EMAIL PROTECTED]
> Subject: cvs commit: src/sys/boot/alpha/common Makefile.common
>
> peter 2000/05/12 15:45:16 PDT
>
> Modified files:
> sys/boot/alpha/common Makefile.common
> Log:
> Reactivate the FICL hooks to make it be compiled in, but also initialize
> FICL. bootforth is now live on the Alpha!
>
> **BEWARE** - you *MUST* build and install a current libstand or you will
> most likely get zfree() panics at loader startup.
>
> We should now be able to set up the loader.conf stuff on the Alpha too.
>
> Revision Changes Path
> 1.7 +9 -9 src/sys/boot/alpha/common/Makefile.common
>
> ------- End of Forwarded Message
>
>
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-current" in the body of the message
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
