If you want to try internal GPU... GPU on Skylake-generation processors is not yet supported on -head. If you want to test without nvidia GPU, you need to try drm-next branch with x11-drivers/xf86-video-intel (for the branch?).
https://lists.freebsd.org/pipermail/freebsd-current/2016-December/063980.html https://github.com/freebsd/freebsd-base-graphics https://wiki.freebsd.org/Use%20linuxkpi%20in%20DRM#Testing_Instructions_.2F_How_To Don't forget to remove (or comment out) nvidia-driver related things from loader.conf and xorg.conf if you try Intel internal GPU. x11/nvidia-driver doesn't support hybrid (Optimus) graphics (even on Linux version). As I'm running with nvidia-driver, I've not tested the branch at all. So possibly some info could be racked to make it fully functional. On Tue, 6 Jun 2017 22:08:24 +0800 blubee blubeeme <gurenc...@gmail.com> wrote: > This is getting out of hand. I can't even keep x going for ten minutes > sometimes. > I've tested all the suggestions in this thread and they just don't work. > > I have put out a print of sysctl hw. here : https://paste2.org/ It was the top page. No info available. > > With this CPU: hw.model: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz > The bios on this laptop I can either set graphics to discrete or mshybrid. > > I've tried in the past to disable discrete and run mshybrid but that always > comes up with 0 screens found. Even just doing Xorg -configure. > > Anyone have some tips on disabling nvidia drivers, running this cpu with > igpu for a while? > > Best, > Owen > > On Sun, Jun 4, 2017, 18:11 blubee blubeeme <gurenc...@gmail.com> wrote: > > > Thanks a lot! I'll give it a shot in a bit. > > > > Best, > > Owen > > > > On Sun, Jun 4, 2017, 16:59 Tomoaki AOKI <junch...@dec.sakura.ne.jp> wrote: > > > >> Yes. FreeBSD patches in x11/nvidia-drivers/files are applied as usual. > >> > >> But beware! Sometimes upstream changes make any of FreeBSD patches not > >> applicable (incorporating any of these, incompatible modifies, ...). > >> > >> For 381.22, current patchset applies and builds fine for me. > >> > >> > >> On Sun, 04 Jun 2017 08:04:50 +0000 > >> blubee blubeeme <gurenc...@gmail.com> wrote: > >> > >> > I'm running with svn and I build by make. > >> > If in use these steps, the BSD related patches will be applied, etc? > >> > > >> > Best, > >> > Owen > >> > > >> > On Sun, Jun 4, 2017, 15:53 Tomoaki AOKI <junch...@dec.sakura.ne.jp> > >> wrote: > >> > > >> > > Hi. > >> > > > >> > > Not in ports tree, but easily overridden by adding > >> > > > >> > > DISTVERSION=381.22 -DNO_CHECKSUM > >> > > > >> > > on make command line. Makefile of x11/nvidia-driver has a mechanism > >> > > to do so for someone requires newer version (newer GPU support, etc.). > >> > > > >> > > If you're using portupgrade, > >> > > > >> > > portupgrade -m 'DISTVERSION=381.22 -DNO_CHECKSUM' -f > >> x11/nvidia-driver > >> > > > >> > > would do the same. > >> > > > >> > > If you installed it via pkg, there's no way to try. :-( > >> > > (As it's pre-built.) > >> > > > >> > > > >> > > On Sun, 04 Jun 2017 07:04:01 +0000 > >> > > blubee blubeeme <gurenc...@gmail.com> wrote: > >> > > > >> > > > Hi @tomoaki > >> > > > Is that version of nvidia drivers currently in the ports tree? I > >> just > >> > > > checked but it seems not to be. > >> > > > > >> > > > @jeffrey > >> > > > I just generated a new xorg based on the force composition setting. > >> I > >> > > > merged it with my previous xorg I'll reboot, see if it gives better > >> > > > performance. > >> > > > > >> > > > It seems like my system is locking up more frequently now. Sometimes > >> > > right > >> > > > after a reboot the system, the screen locks and it's reboot and > >> pray. > >> > > > > >> > > > Best, > >> > > > Owen > >> > > > > >> > > > On Sat, Jun 3, 2017, 21:59 Jeffrey Bouquet < > >> jeffreybouq...@yahoo.com> > >> > > wrote: > >> > > > > >> > > > > SOME LINES BOTTOM POSTED, SEE... > >> > > > > -------------------------------------------- > >> > > > > On Fri, 6/2/17, Tomoaki AOKI <junch...@dec.sakura.ne.jp> wrote: > >> > > > > > >> > > > > Subject: Re: nvidia drivers mutex lock > >> > > > > To: freebsd-current@freebsd.org > >> > > > > Cc: "Jeffrey Bouquet" <jeffreybouq...@yahoo.com>, "blubee > >> blubeeme" < > >> > > > > gurenc...@gmail.com> > >> > > > > Date: Friday, June 2, 2017, 11:25 PM > >> > > > > > >> > > > > Hi. > >> > > > > Version > >> > > > > 381.22 (5 days newer than 375.66) of the driver states... > >> > > > > [1] > >> > > > > > >> > > > > Fixed hangs and > >> > > > > crashes that could occur when an OpenGL context is > >> > > > > created while the system is out of available > >> > > > > memory. > >> > > > > > >> > > > > Can this be related > >> > > > > with your hang? > >> > > > > > >> > > > > IMHO, > >> > > > > possibly allocating new resource (using os.lock_mtx > >> > > > > guard) > >> > > > > without checking the lock first while > >> > > > > previous request is waiting for > >> > > > > another can > >> > > > > cause the duplicated lock situation. And high memory > >> > > > > pressure would easily cause the situation. > >> > > > > > >> > > > > [1] http://www.nvidia.com/Download/driverResults.aspx/ > >> 118527/en-us > >> > > > > > >> > > > > Hope it helps. > >> > > > > > >> > > > > > >> > > > > On Thu, 1 Jun > >> > > > > 2017 22:35:46 +0000 (UTC) > >> > > > > Jeffrey Bouquet > >> > > > > <jeffreybouq...@yahoo.com> > >> > > > > wrote: > >> > > > > > >> > > > > > I see the same > >> > > > > message, upon load, ... > >> > > > > > > >> > > > > -------------------------------------------- > >> > > > > > On Thu, 6/1/17, blubee blubeeme <gurenc...@gmail.com> > >> > > > > wrote: > >> > > > > > > >> > > > > > Subject: > >> > > > > nvidia drivers mutex lock > >> > > > > > To: freebsd-po...@freebsd.org, > >> > > > > freebsd-current@freebsd.org > >> > > > > > Date: Thursday, June 1, 2017, 11:35 > >> > > > > AM > >> > > > > > > >> > > > > > I'm > >> > > > > running nvidia-drivers 375.66 with a GTX > >> > > > > > 1070 on FreeBSD-Current > >> > > > > > > >> > > > > > This problem > >> > > > > just started happening > >> > > > > > recently but, > >> > > > > every so often my laptop > >> > > > > > screen will > >> > > > > just blank out and then I > >> > > > > > have to > >> > > > > power cycle to get the > >> > > > > > machine up and > >> > > > > running again. > >> > > > > > > >> > > > > > It seems to be a problem with nvidia > >> > > > > > drivers acquiring duplicate lock. Any > >> > > > > > info on this? > >> > > > > > > >> > > > > > Jun〓 2 02:29:41 blubee kernel: > >> > > > > > acquiring duplicate lock of same > >> > > > > type: > >> > > > > > "os.lock_mtx" > >> > > > > > Jun〓 2 02:29:41 blubee kernel: 1st > >> > > > > > os.lock_mtx @ nvidia_os.c:841 > >> > > > > > Jun〓 2 02:29:41 blubee kernel: 2nd > >> > > > > > os.lock_mtx @ nvidia_os.c:841 > >> > > > > > Jun〓 2 02:29:41 blubee kernel: > >> > > > > > stack backtrace: > >> > > > > > > >> > > > > Jun〓 2 02:29:41 blubee kernel: #0 > >> > > > > > > >> > > > > 0xffffffff80ab7770 at > >> > > > > > > >> > > > > witness_debugger+0x70 > >> > > > > > Jun〓 2 > >> > > > > 02:29:41 blubee kernel: #1 > >> > > > > > > >> > > > > 0xffffffff80ab7663 at > >> > > > > > > >> > > > > witness_checkorder+0xe23 > >> > > > > > Jun〓 2 > >> > > > > 02:29:41 blubee kernel: #2 > >> > > > > > > >> > > > > 0xffffffff80a35b93 at > >> > > > > > > >> > > > > __mtx_lock_flags+0x93 > >> > > > > > Jun〓 2 > >> > > > > 02:29:41 blubee kernel: #3 > >> > > > > > > >> > > > > 0xffffffff82f4397b at > >> > > > > > > >> > > > > os_acquire_spinlock+0x1b > >> > > > > > Jun〓 2 > >> > > > > 02:29:41 blubee kernel: #4 > >> > > > > > > >> > > > > 0xffffffff82c48b15 at _nv012002rm+0x185 > >> > > > > > Jun〓 2 02:29:41 blubee kernel: > >> > > > > > ACPI Warning: > >> > > > > \_SB.PCI0.PEG0.PEGP._DSM: > >> > > > > > Argument #4 > >> > > > > type mismatch - Found > >> > > > > > [Buffer], ACPI > >> > > > > requires [Package] > >> > > > > > > >> > > > > (20170303/nsarguments-205) > >> > > > > > Jun〓 2 > >> > > > > 02:29:42 blubee kernel: > >> > > > > > > >> > > > > nvidia-modeset: Allocated GPU:0 > >> > > > > > > >> > > > > (GPU-54a7b304-c99d-efee-0117-0ce119063cd6) @ > >> > > > > > PCI:0000:01:00.0 > >> > > > > > > >> > > > > > >> > > > > > Best, > >> > > > > > Owen > >> > > > > > > >> > > > > _______________________________________________ > >> > > > > > freebsd-po...@freebsd.org > >> > > > > > mailing list > >> > > > > > https://lists.freebsd.org/mailman/listinfo/freebsd-ports > >> > > > > > To unsubscribe, send any mail to > >> > > > > "freebsd-ports-unsubscr...@freebsd.org" > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > ... then Xorg will > >> > > > > run happily twelve hours or so. The lockups here happen > >> > > > > usually > >> > > > > > when too large or too many of > >> > > > > number of tabs/ large web pages with complex CSS etc > >> > > > > > are opened at a time. > >> > > > > > So no help, just a 'me > >> > > > > too'. > >> > > > > > > >> > > > > _______________________________________________ > >> > > > > > freebsd-current@freebsd.org > >> > > > > mailing list > >> > > > > > https://lists.freebsd.org/mailman/listinfo/freebsd-current > >> > > > > > > >> > > > > To unsubscribe, send any mail to " > >> > > freebsd-current-unsubscr...@freebsd.org > >> > > > > " > >> > > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > -- > >> > > > > Tomoaki > >> > > > > AOKI <junch...@dec.sakura.ne.jp> > >> > > > > > >> > > > > > >> > > > > > >> > > > > ........................ > >> > > > > might be a workaround > >> > > > > Xorg/nvidia ran all night with this: > >> > > > > nvidia-settings >> X server display configuration >> Advanced > >> >> > >> > > Force > >> > > > > Full Composition Pipeline > >> > > > > ... for the laptop freezing. Could not hurt to try. " merge with > >> > > > > Xorg.conf " from nvidia-settings... > >> > > > > ...................... > >> > > > > 18 hours uptime so far, even past > >> > > > > the 3 am periodic scripts. Have not rebooted out of the Xorg > >> though > >> > > so > >> > > > > may require edit-out of > >> > > > > xorg.conf if that is the case, in other words differing from > >> real-time > >> > > > > apply and > >> > > > > xorg initially start applies. > >> > > > > ........ > >> > > > > > >> > > > > > >> > > > _______________________________________________ > >> > > > freebsd-current@freebsd.org mailing list > >> > > > https://lists.freebsd.org/mailman/listinfo/freebsd-current > >> > > > To unsubscribe, send any mail to " > >> > > freebsd-current-unsubscr...@freebsd.org" > >> > > > > >> > > > > >> > > > >> > > > >> > > -- > >> > > Tomoaki AOKI <junch...@dec.sakura.ne.jp> > >> > > > >> > >> > >> -- > >> Tomoaki AOKI <junch...@dec.sakura.ne.jp> > >> > > > _______________________________________________ > freebsd-current@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org" > > -- Tomoaki AOKI <junch...@dec.sakura.ne.jp> _______________________________________________ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
